Search results

I second that, its the smaller text giving me issues as well, I typically have no problem with anything over an 1" tall but under that I start having fits

if you use flexi there are options for ussing the split lines under the send to cutter, however if you send through the rip and print function, there is no option to add the split lines,

so I do have flexi and can add those lines very quickly using flexi, however that only works with the cut function side of flexi, if I send it through the printer first, I have found that flexi does not have the option to add split lines to something being sent through the rip and print...

that being said is there an easy weed option when sending through the printer? I have an HP315 and am using flexi but there is an easy weed option for the cutter but not when sending through the printer first?

Couldn't agree more. I went out there and helped him finish up and granted peeling letting is a tedious process regardless.

Need some advice. What is a method to speed up the weeding of vinyl from large runs of text. Will relief lines help? I have a guy in my shop who spent longer than desired weeding about 10 lines of text. I used oracal which is a cheaper vinyl but shouldn't have had any difficulty weeding the...

yes still using the shielded ethernet cable (the grounding wire fixed the static shock issue), I can connect on the USB fine with cutter control, even with the print manager and flexi open, the cutter control can still connect with the cutter through USB, just not ethernet, I checked the...

Hey all couple of questions, for some reason my hp cutter control won't let me connect to my cutter via ether net. It's saying connection refused. Why is this? (I have no networking experience and no in house IT support. So I'm flying blind on this). Second question is, my cutter has been...

so i will try that along with this, and it makes me feel like a complete idiot not using of knowing that I had these just lying in a box and not knowing what they were for, but turns out I have clamps that slide onto the carrier shaft on each end of the media tube which helps prevent the...

Hey all I need some help. I have A35 5-T H laminator and later and I have telescoping issues and walking issues on almost every single run I do on it can anybody tell me why? And can also somebody point me in the right direction on how to fix this problem?

if the vinyl is tacked onto the take up reel at a slight skew, a long print run will move down the take up reel and cause the carrier layer to break and tear, basically the vinyl spirals to one side or the other of the take up reel if it is mounted with a skew and not level

less than 2 days most times, sometimes my installer will finish the morning of pick up, ideally I try to have the wrap done and finished at least two full working days before the customer pick up, but since we are the manufacture of what we are installing on as well, I typically have a larger...

so I typically don't use the hold down tabs or print edge to edge, while edge to edge would be wonderful to do someday, currently wear many hats at my job and don't have the time to sit down with it, but I do have a leading edge issue which I have yet to solve. currently I have to print with...

thats great to know for the future! thank for all your help

UPDATE! Thanks all for the feed back, it turns out it was a leader issue, I flipped the job and ran it and it ran just fine thank you all for your help

ok so I rotated the media and ran the job backwards, since it was a square panel it did not matter. I also added a bit of a tail to the media, i think you were right and the length was throwing it off a bit, but to all of that, I have no idea still why I was experiencing the error in the videos...

firm ware updated, usb being used here is a video link of what is occurring

yes I did, not I have a different thing happening on top of the video above. my cutter is reading the full length of the media but not all the registration marks,this is not the only one its doing it to either. it will register the first mark next to the barcode in the lower right, then read the...

My cutter is rewsing the registration marks just fine untill it gets to the spot in the video.... any help would be wonderful, I can't seem to figure it out

My cutter is rewsing the registration marks just fine untill it gets to the spot in the video.... any help would be wonderful, I can't seem to figure it out