Search results

The $200 is for the stand/base only. The aluminum panel print is extra. I'm thinking in the $500 range for the whole thing This will be used for brooms and other cleaning items

Indoor, I'm wondering about the weight of the brooms etc tipping it over and needs to last for many years.

I have a customer wanting to create something similar to this with their branding, 10+ of these: The one in the example is acm, easy way would be to buy this and apply my graphic to it but this stand/board is way over budget for customer. I was thinking of using a poster stand like this and...

I've used hundreds of times and get excellent result for under $10, ready within 24 hours

Use vectorizing services, I use all the time, any low rez jpeg can be turned into a perfect vector. Pretty cheap too

I print in high quality mode for most gloss prints and matte speed for most matte prints. Still over 400 sq ft/hr and I don't have to worry about quality and trouble shoot/dial in settings Banner I run in production modes

all the test shows is that you can get good print quality in HQ mode and superior mode. You can have missing nozzles and the printer will compensate in the HQ and superior mode that the nozzle test prints. I have up to 5 nozzles missing per head and the test shows perfect quality but hose...

I think in order to print at fast speed like gloss production you will need to have all printheads near perfect. couple of missing nozzles will show up at that speed as there just is not enough time/passes to compensate. I know with the missing nozzles I have I can't run gloss production mode...

Take payment and do the job as the customers wants it. Payment first in this case

I just received this on Friday, will set up in a few days and report back Looks very good quality so far https://www.hotlaminator.cn/LF1700-D1.html Under $3k delivered. There are some companies rebranding this and selling for $7k

That's about right. I would do one for 1k -1.5k depending on how busy I am and how close it is to me. Give them a slight discount for more signs to encourage them to get it all done at once like 5 for 5k.

roofing company bough the decal as a thank you for the roofing customer.

Yes was pretty lumpy, had to use 4" squeegee. Still sore 4 days later

Will get to test out those Colorado UVgel ink claims lasting a long time without lamination.

Update, got it done. Can't wait to see the drone shots First 2 panels I did using 64" squeegee using the floor decal method. Did not work too well as the roof is not perfectly flat like a floor, lots of waves, dips, +-.5" everywhere. Rest was done with hinge method with a 4" squeegee. Tried a...

uline has a ton of kraft paper options https://www.uline.com/Product/Detail/S-6073/Kraft-Paper-Wrap/50-lb-Kraft-Paper-Roll-60-x-720 $92 for 720ft or $77 if bought in bulk. I use this for packaging fill

The techs have a magnetic printhead cleaning tool (same one we have that the foam bad goes on but their is magnetic) so they don't have to hold it for 5 minutes while doing the methyl benzoate soak. Step 1 in the tech manual for print head issue is to run a powerful flush, if that doesn't help...

Your test print doesn't look too bad, 2 weeks ago I had problems with a magenta head, test print looked much worse than yours. Tech applied the Methyl Benzoate cleaning solution to the foam pad and kept it on the bad head for about 5 minutes. The head went from 15 missing nozzles to 5 and print...

I started my business with a capcom cutter from uscutter. Was around $500 for 54", worked very well and lasted about 2 years of daily use until the stepper motors gave out. Some of them do have registration mark reading capability

When I had a summa t series, over 10% of blades would chip immediatley