Search results

Hey thanks for your reply! The skeleton is something that comes with it when it is installed? I’ve moved a JFX200 before and it has the yellow bars, is it similar to that?

Hey all, I need to move a JFX500 printer and am looking for the service manual and for any instructions on how to prep the machine to be put on a truck and moved. Anyone done this before or have the service manual? Thanks in advance!

I am having a strange problem with my flatbed that hasn't been able to be diagnosed. When doing through the setup sheet menu it gives a pinch roller error so you aren't able to finish the setup, which means no printing. The hole for the pinch roller lever is still on this machine but it...

We have an LEF-20 and are located in Los Angeles. PM me if you still need help.

We are in the market to buy a used Oce Arizona series printer. I know a lot of life and condition it’s in relies on how the machine was taken care of but is there sort of a rule of thumb on what the lifetime square footage of printing on them is? What other expensive parts besides printheads...

In need of changing out some printheads on my Agfa Anapurna. Regular cleanings have failed to fix all the clogging issues I'm having. Does anyone have a guide/instructions on how to remove and reinstall printheads on Agfa Anapurna MW/MV or any other Agfa machine that has a similar procedure...

Hey Ken, Turns out it the motor went bad. After a lengthy process of elimination I was lucky and found a brand new motor in the box that he gave me with his collection of spare parts and swapped the motor out. It wasn't easy and still have to snake the electrical through the cord protector but...

Hey Andy, thank you for that suggestion. I am going to try to do this over this upcoming weekend. Can you let me know how you did that? Did you take the heads completely out of the machine? or did you park the whole shuttle in some sort of tray or was it the capping station? Let me know I'd...

Copy, this is sort of what I've been trying to do. So the color button located on the back of the carriage behind the door will push solution through if the valves are set to solution? Last night I seemed to have developed a new problem which Im hoping is an easy fix. The solution does not...

Ok, thank you Ken! So I'm reading through the operator manual and trying to figure out how to do the solution flush. It says to push onto the "Flush button" on the back of carriage. Where is this flush button? Ive opened the back panel and only see two small white buttons, one labeled color...

I've recently acquired an Agfa Anapurna MW. I'm a newbie to UV flatbed/hybrids but have been running a sign shop for many years. When I bought it last month the printheads seemed to be in good working condition from the test prints we did (except white which has been shut off). We did the...

I bought a used Agfa Anapurna MW last month and got the Wasatch RIP 7.0 installation discs along with it. The printer is set up and ready to go but I cannot get the software to communicate at all with the printer. Also, the image configurations seem to be missing except the 4 pass 720x720...