Oce Arizona Lifetime Meter Counts

You have to get an approval on it from Oce service department which is quite thorough.
They also prep, move and set it up for you but it is expensive.

 

If possible, check the log - if there are connection errors between mainboard and carriage, it may suggest damaged Firewire cable. Look at the igus chain and check the ink ribbon and coolant tubings, they wear out in time. Depending on the model ink pumps may wear out too (look under the pumps, if there is black dust there, if you find it, the pump will reach the end soon). Listen to the movements of the carriage and gantry, sometimes it's possible to hear damaged bearings/motors.

 

GrafexDesigns are you still looking to purchase an Oce Arizona? I have a 365 GT with white and roll to roll option for sale. It has 32000 square feet on the master counter and its located in Northern California?

 

Hi Bruce, you mention that Oce needs to "approve" this. Could you elaborate? Does Oce not want these printers sold on the used market? We're also in the market for a used flatbed UV, so we've considered an Oce Arizona. Is there a reason we should avoid it? Thanks,
-Andy