Search results

Have you considered the Epson 5070 instead?

I have two unopened expired printheads....do you think I should try one to test your theory? I can't imagine it would be a problem if I need all new printheads anyway and might confirm that would be the fix. I'm not excited about trial and error testing a whole new set of printheads...that could...

Actually you were one of the primary people I hoped would respond as I've seen your answers to similar questions and you seem to know what you are talking about, so thank you. I'm not sure though why you are saying to possibly get new printheads if you think the cable may be screwed up? I was...

I had a failing carriage belt on my HP 365 so yesterday I replaced it with a new belt assembly according to the service manual. Unfortunately, the service manual tells you to unplug all the flex cables and remove the PCA board, which in hindsight I don't think was necessary and I did find it a...

I would also appreciate that HP 365 Service Manual gboros@signworksstudios.com Thank you!

The mark size should always be .55" and the line width should always be .012" for every job.

You're just going to have to try it to answer your own questions really but it has been my experience that you can cut only as wide as the rollers will go. If you are using the registration marks as shown they can go slightly under the rollers but not too much. Also, if they are too close to the...

It's Infinite Stroke

Thank you so much for your help on this one....you are awesome and really saved the day for me!

I would be very grateful if anyone would possibly be able to convert two Corel files for me from CDR to AI...please let me know and I can send them. Thank you!

We have a Juki 1541S, which is a single needle machine but I think it's about the best choice you can make.

Set the White and Red to overprint and then set the White to print first in the print options

This request was from 7 years ago if you hadn't noticed......

So that Blox-Lite can be found from a number of suppliers, just do an internet search and you'll find someone. It is a fairly heavy cover stock type material that comes on a roll for wide format printing and since it came off a roll I'm sure it can go back on a roll for take up. Since it's so...

Blox-Lite

Why are you all turning the air assist off? What is happening if you leave it on?

If anybody is interested, I have an Afinia DLF 220L for sale....I'll list it in the for sale section if I can figure out how that works.

The 6mm ACM is a good choice but you need to be a little cautious when using other materials with HDU, never use MDO. The different materials can expand and contract at different rates and possibly cause the HDU to crack. If it needs additional strength, we will typically build a steel frame...

Is this one sided or two sides carved? Is it going between the posts or on the face of the posts? That size on two posts doesn't really need anything else, 1.5" single sided on the face of the posts is fine or 2" double sided between the posts is fine. Where are you located?

Just curious, what was the outcome of this?