Search results

I have an ES-1000, and it works fine as an i1 Pro with MPM3. I have none, but I‘m pretty shure that the ES-2000 (i1 Pro 2) can be used too as i1 Pro 2-compatible. I know other i1 OEMs, and I know that in the EFI RIPs the driver is the same.

Yes. It is just an OEM-Version. Dont buy a first EFI ES-1000 (old i1): there is a hardware UV-Cut-Filter integrated, so you cant measure all possible conditions. Not a problem with the ES-2000 (i1 Pro 2). Unfortunately Mimaki has integrated calibration too (Ink Limits and Linearization) into...

I work for a mimaki dealer, and only one other of our 12 members of the service team except me would be able to write profiles or to handle a spectro. Most of them are very good, experienced hardware guys, but with limited software knowledge, being both is very rare. Learning profiling is not...

With what do you compare, what is your reference? Pantone colors are really hard to match on a 4-Color-Printer, because pantone colors are solid colors mixed out of a collection of 18 base solid colors, and meant to be mixed physically and filled into an offset printing machine. And they are...

As far as I remember, the converter "SCV to EPS" needs an installed Inspire. It was a batch program only what uses inspire to convert. With Flexi, is is possible to use SCF-Fonts (old Casmate-Fonts) too, so you do not run into trouble when the files contain them. In the Flexi App-Folder is a...

Flexi 21, in opposite to Flexi 19, has - among other things - the following new features: - New functionality to print variable data (including variable pictures and so on) - Multi-Layer-Print (for printers who supports it) - Jig-Templates - Preview of output channels (good for checking White-...

It depends. Flexi 21 has some interesting new features for printing, for example new features for printing variable data.

You should adjust the vacuum pump. There is an adjustment screw, accessible at the back of the machine, where the ink cartridges are located. There is a suggested range for the value which is shown on the display when entering the vacuum pump adjustment menu. Unfortunately I dont remember...

Yes. But sometimes bad settings on a PC can generate a lot of load to a network too.

Sometimes the problem is something which makes a lot of traffic on the network. I sometimes have needed to configure printers on a separate LAN-Card with a crossover cable to let them work well (I‘m a supporter).

As far as I remember, Latex 360 isn‘t supported by Onyx 10 (too old).

Do you want to use the software for vinyl cutting? Or Print & Cut?

Regularly Mutoh bundles their printers with Flexi or Onyx. But most RIP-Softwares supports Mutoh Printers and contour printing with Summa Cutters.

Shure you have setup a 100BaseT-Network with appropriate cables?

Is in the Production Manager, at the same place at it was in 7.6.

Perhaps you have pre-configured 5 Copies in your quickset?

Junction boards are only for connecting things together. There is no big electronics on it. You should be able to repair it with a soldering iron. SP300V was discontinued in 2009, the SP540V in 2007. Most of that companies keeps parts on stock for 10 more years. It will be hard to find such...

No, this never existed for that devices. And if it had been otherwise, the parts would no longer be available today.

The printer manual should contain info about the suggested ranges of humidity and temperature. Of course issues with that can lead to print quality issues. Even the print media can be the problem.

If you like Roland, you can buy a Truvis VF2 Print-Only.