Search results

There is an option in the cut dialog to avoid cutting double lines. Unfortunately here is late evening, but I can check it tomorrow.

They are below the right side cover.

Linear Encoder damaged or dirty, Linear Encoder Sensor damaged or dirty.

Hi Does anybody use Mimaki Profile Master 3 for equalizing printer colors? Or have let someone have done that for his printers? If yes, how precise was it in your case? Im a little in trouble with 3 x UJF-7151: if using a standard swatch for checking colour consistency (FOGRA in EFI Verifyer)...

I‘m shure even at Roland nobody have intended to use the „Tabs“ to sort Jobs like you do. Mainly (99,9% i assume) use it to assign settings automatically to jobs they added into. A warning: dont use Queues in RIP-Softwares for archiving (to reprint jobs accasionally). It slows down your...

In comparison with the print queues, you can set up much more than 5 quick sets in Onyx.

The Latex 260/L26500 puts heavy load on the generator (the generator slows down and „jumps around“) but works without error. The Latex 360 puts less load on the generator, but have cancelled heating quickly with an error message about something like „unstable power supply“. For me, it looks like...

Of course. My answer was just a comment to „If that L260 works why not L360“. Exactly that is not shure with a given configuration. The L260 is not a proof for a L360.

We have tested that for a roadshow in a trailer. With our generator, the L26500 works, the 360 don‘t. The 26500 puts a lot of load on the generator when heating (the motor slows down badly), but it heats and prints. The Latex 360 throws a heater system error with less load on the generator. It...

I am a software supporter and salesman of a company who sells and supports Onyx, Caldera, Flexi, Digital Factory, Printfactory, Ergosoft, Colorgate, Fiery, and supports Rasterlink and Versaworks … all of that softwares have their pros and cons, and if you dont have issues with the software you...

This could happen if the knife origin (correct orientation of the knife in cutting direction) is wrong. The way to adjust it is described in the user manual, section 2.2.4 (can be downloaded at www.summa.eu ). You will find the knife calibration-function when choosing the button „Configuration“...

Is not the same as Enroute. And officially discontinued.

Check the serial number: there are two groups of characters/letters, separated by a dash. The last 4 digits of the first group shows the manufacturing year and month: S81806-10001 Manufacturing date June 2018 (1806)

I work for the dealer who sells by far the most 7151 in germany, a lot of them at industrial applications, a few for example automatically fed by robots, printing around the clock. It really looks like that you get a lemon. Of course that machines arent perfect, we do some improvements to them...

You‘re welcome

Have you tried to adjust bidirectional printing?

The cutter wont measure the media width, it will measure the distance between the two outer pinch rollers. Have you set the pinch rollers near to the edges of the media?

Depending in which direction you have the offset, you need to adjust the bidirectional printing or feed settings.

Flexi works fine with Latex, as Onyx do too, or Caldera. I havent tested Onyx Go until now, maybe online licence checking together with a poor internet connection quality or wrong Proxy-settings could lead to problems.

We have a 1641 SR in our Showroom in germany, and I had little time to learn how the machine works until now. For my opinion, the print quality is very good out of the box, at minimum comparable with the older 16x4 machines after doing basic calibrations (for example feed and bidirectional)...