Search results

A high ink limit will not lead to colours that are to dark if the ICC-profile works correctly. Setting an ink limit is for avoiding bleeds, banding or drying issues, the colours are managed by the ICC-profile. There are color management settings that could lead to color deviations. Very...

Dont use any values you have heard from somewhere, do the complete process as needed for your printer (profiling only with printers in contone mode, or completely with calibration - ink limits and linearisation - in halftone mode). Have you really set the overall (total?) ink limit to 80%? You...

The HP-Printers do a lot of communication with the RIPs, perhaps there is something wrong. Have supported the Latex-Onyx-combination several years. What operating system do you use? How much RAM and harddisk space? How fast is your network (100 or 1000BaseT)?

If using OPOS Barcode, you should not set the tool above the first marker, but in front / below the barcode. The Summa should tell you that on the display. Sometines you need to activate the barcode server in PM through the menu which appears by right-click. There is a menu entry too to start...

OPOS Barcode will have different barcodes for each orientation, and different cutting files. It is nearly impossible that the files are cut in wrong direction. It is shurely not a software bug, Flexi 19 have worked fine.

There are possibilities to test and adjust the sensor. Not shure how without being in front of the machine, and I‘m not been in the VP540 Servicing business since years. As far as I remember there is a potentiometer on the little board on the tool carriage to adjust, and a menu entry in the...

There are software available where you can individually config your ink channels. But it will be difficult to set up the printers ink system.

No idea, sorry.

I dont remember, it was two years ago. I think it wont start.

You need publish. You need a CMYK-Profile Generator to create profiles for Versaworks, the basic bundle will not contain that. Basic would make sense only if you have a RIP-Software with built-in Profile generator.

Interesting. Perhaps I had problems with my dongle.

Because you write bullshit, and people who believe you could buy things which are senseless to them, what could lead to additional costs. With the i1 Basic-Bundle, or some OEM-Bundles, you will get an i1 Profiler were CMYK-Profiling is not licenced. So it is completely useless for creating...

OK. Of course you can say that "if you have a software for ICC-Profiling, you don´t need another". VersaWorks dont USE pm5 to build icc, and it will not be delivered with. It is a completely separate software as i1 Profiler is too. If you have neither PM5 or i1 Profiler, you can´t create ICC...

Thats not true too. Profilemaker 5 is a very outdated software, which you had to buy separately too as long as it was available 10 or more years ago. Today, an update from PM5 to i1 Profiler is available. Of course, if you have a ProfileMaker which still works (will not under Windows 10 as far...

Why is written there that you need a profiling software which is capable to create CMYK output profiles? Because Versaworks itself cant do that. The only thing you can measure within versaworks is the linearisation.

I do Versaworks-Support since it is on the market, since 2005. You can do ink limiting (visually) and linearization (with a spectro), but you CANT create an ICC-Profile within Versaworks. Could it be that you dont know the difference between calibration and profiling, or between Linearization...

For Versaworks, you need the i1 Publish-Bundle with the i1 Profiler Software for CMYK-Printers too, because Versaworks dont have functionality to create ICC-Profiles. Ink limits are not measured with a spectrophotometer in Versaworks. There are RIP-Software who do that with single ink limits...

Regularly it is easy to mount the head on the machine: loosen the screws with which it is fixed a little bit, so that you can move it. Set something you know it have a 90° Angle on the platen and align it with the vertical border of the metal frame (for example a metal angle or a rectangle...

For adjusting the OPOS, you do not need to take off the head. There is an OPOS-Calibration function in the menu, and a media calibration for adjusting the contrast sensitivity of the sensor too. To horizontal the head, you need to loose the 3 screws which holds the head on the back plate. For...

There are guidelines from HP to train users at that machine, use and maintenance, 2 days.