Search results

This printers can't be upgraded with a file downloaded from the internet. Firmwares for this machines are delivered on a memory card which needs to be plugged into the printer. There is a slot for that, as far as I remember on the same side of the electronic box where the interface is. You...

You can do Profiling with Postershop too, but because Postershop don't have functionality to read ICC-Targets and generate ICC-Profiles out of the measured data, you will need external software from this point. Owning an i1 will not automatically mean that you can use i1 Match to finish your...

Yes, we could, but we are in an english language forum, and it would be rude to use a language which most of the people will not understand. We won't do that in a personal discussion too. The Boards are different between 540/640/740 and 545/645/745 (since 2005). I'm not shure if a new board...

Which sensor works? I suggest you should test another sensor at the tool carriage, e. g. the cropmark sensor. It could be a shortcut that the sensor is permanently on. The flat cable you have changed, is that a used one from your other machine? Try a new one. What happened when you press the...

is the cable connected the right way?

it would be helpful to know which version of Flexi do you use. And were the files will be saved, sometimes there is trouble when saving it to a network volume.

I would suggest to try 7.7v2.

Yes. Dating up to an Intel-Mac with OS 10.7 or newer will kick your Flexi 7.5 because Flexi 7.5 isn't compatible with the Intel processors Apple use since several years, and from 10.7 on the emulator which allows old Software to run is not integrated anymore.

Yes. As soon as you print a color which is not 100% of a Process color or a 100%-mixture of a process color, the printer needs to dither the color. And that will lead to a visible screening as shown in your sample. How fine the dithering is depends on how fine the printer can print, and how...

The HP 5000 is not able to print on uncoated Vinyl. You need to use special coated inkjet media.

Be careful with the cables too. It's easy to damage them or plug them in incorrectly. As far as I remember Mutoh suggest to replace them as soon as they are plugged in and out 5 times.

You can try to do that. If you need to reach the head driver board or mainboard be shure to use an electric screwdriver, because there are a lot of screws to remove ;) . If using a head with solvent ink and remount it in a water based unit, it could happen that the heads will be clogged because...

if you have used a head for solvent you can't clean it good enough for not being in danger to run into trouble. When Mutoh introduces the Rockhopper I it was offered for running with water and solvent inks, conversion was allowed from water to solvent, but not the other way round. By the way...

There are fuses on the mainboard for the heads, at this machines they are soldered. At the attached picture you could see a Mutoh fuse of this kind, but because its one for a rockhopper II it could be that the ones for the RH I differs. They are around 2-3mm long. You should check the...

I don't know which software you use but in most softwares you have the possibility to set a setting like "advance after plot". When this is deactivated the plotter will start every job from the same origin ... activate it and the plotter will plot each job after the other.

Flexi 8.1v1 will run on Windows 7, but will NOT output to several output devices because of compatibility issues. The oldest version which is entirely (99.9%) compatible with windows 7 will be 8.6v2.

It will not work with uncoated vinyl. It could be that you will be successful with very low ink limits on a few medias, but with poor gamut. The first Rockhopper I, which was an EcoSolvent-Printer based on the RJ-6000, was unable to print acceptable quality on vinyl too even the printer was...

The Printer don't check if the Wiper is new or not. Its a counter who can only be resetted with using the regular way to replace wipers through maintenance menu. When replacing the wipers using for example the service modes I/S-menu the counter will not be resetted and the message continues...

If you need Mac, check www.magisign.com.

Be shure that the Unit is not too old or recalibrated. I1 Pro will Run with the FlexiPro- Profiler.