Search results

Your best bet is to do as mentioned above, in Photoshop tweak the image to add more brown and less green, it may not look correct on your monitor, but it will print correctly if you make the necessary adjustments, and then save the image as a TIFF which will hold the correct color adjusted values.

A long time ago I read a post about covering the print head with plastic wrap or aluminum foil, I can't remember which. To create a barrier to keep the print heads from drying out. Mind you I have NOT done this, but it sounded like a cleaver idea.

Service Manual anyone?

Yep, All other materials will have problems with dirt and WIND....

So you're saying that STATIC only effects the black ink, why not the other colors? Also the black and cyan share the same print head, so if the print head was bad wouldn't you also see the overspray on the cyan?

I have a SP-540V, where do you find out if the DUAL will work for that printer?

Anyone tried the NEW Roland VersaWorks DUAL? If so how did you like it?

Anyone know what a mesh printing kit is and how tot use it? I have been on several media websites like sealgraphics.com and they refer to a "mesh printing kit", specifically saying: A lightweight 3.2 oz/yd2 polyester flag that is perfect for use with any flag system, plus it features a paper...

What is: Close the choke manually? What does this mean?

How to make a Yeti template I just wrapped the Yeti cup with application tape, used a plastic drafting 30-60-90 triangle to make a vertical line for the seam both on the starting edge and then on the overlapping end, then using a piece of cut 2x4 cut 12" long with holes drilled through it to...

Here is what I'm asking: If I print a 36" x 72" full bleed banner on 38" wide banner material I can tell VersaWorks to center the image on the banner media (L to R). Later when I remove the banner and let it out-gas and then flip it over and load it back into the printer the image will be...

Yes, good to know you are up and running, so glad for you that it was NOT some electronics. I also want to thank you for posting the results, so often I follow someone with a printer issue and they are asking for solutions and then we never hear back from them as to what they discovered fixed...

Never done a 2-sided banner before, I have a Roland SP540V, what is the process to get the back side image to line up with the pre-printed front side image? Is there soe function in VersaWorks that will help with the registration?

Anyone print on any kind of fabric material have this bunching up problem?

I'm trying to print on some non-backed flag fabric from Fisher Textiles and after about 8-9 inches it starts to bunch up in front of the feed rollers. I tried applying application tape on the back and it still did the same bunching up (the heater is set to the lowest setting). Any ideas how...

You mentioned both Graphic Design and then Sign Shop, well I have been involved in both worlds and they are not the same thing. As far as a standard your sign folks on here will tell you there is no standard they use whatever will work for them, however coming to the sign industry after working...

BUMP: Anyone know of a good flag type fabric for eco solvent printing? I got a sample from Fisher Textiles however it looks more like T-shirt fabric and did not have a backing sheet which made it hard to print (bunching up at feed rollers). I would really like a fabric that would have a slight...

Please let us know what the problem was when you get it figured out.... Thanks

Owner of Photo-Tec Graphics & Signs

Graphic Designer/Photographer