Search results

LONG & THE SHORT OF IT IS, just use the gerber cable. you know it will work i have a tendency to turn things into an engineering project, when there is no need

i would think it would work, ASSUMING the printer port was in the correct mode. as you know there are 3, standard, SPP & EPP, i believe. i will look this weekend & locate my older gerber software & give it a try. it seems odd, to say the least that the gerber software would not allow parallel...

attila, i don't use the gerber software. we are a flexi/enroute shop, these days i was figuring we could use the old CAPTURE command & create a local port & allow gerber software to print to it. (it's been 2 many years, we used to do this all the time. i will bring up a xp vm the next time i...

the dongle is the security device that will let the software run. it would be a parallel port pass through device (male to female 25 pin) that connects to the printer port. yours MAY be usb , like a flash drive

or spend $50 for a parallel port print server...

SOMETHING controls the heating, either a TRIAC or a conventional power transistor, or a relay & a control circuit whatever it is is probably shorted we have an OLD seal 400 but it is old enough i doubt my having a look will give us a similar circuit

the shaking keeps solids from settling ou prevents head clogs & premature failure everyone says you use more mage than sny other color your machine must be "white Capable, so, if you don't run white, you run magenta in that slot you have to match one of the preset " ink sets"

you do realize the dryer needs to run a "cool down" cycle before it shuts off?

can the surface be painted? is work clamped, or held by vacuum? if clamped, nitro stan glazing putty & a coat of some sort of sealer or paint

SORRY, I KNOW I AM GOING ON... the last time you had your bucket truck fixed, didn't you have a better understanding of the need for competitive bidding?

many clients have guidelines to follow, where 3 bids are mandatory before approving the project. i can't tell you how many times a client has accidently" left a folder with the other bids on the conference table, though

nothing personal, but, there are other sign shops. the only way for you to be the only one bidding would be to have a signs101 reunion and poison the dinner i am sure you have a successful business, but, you can't have that big a following

it means you need to acquire the service manual & follow and perform all the steps required to change system board. ( i know my way around rolands, can bumble through a mutoh, but, have VERY limited mimaki experience. ) did you change the system board because the machine was completely dead...

different printer? not my first guess, but, since YOU say so, i believe aren't the whole series of printer , basically the same chemistry/technology? (i don't get out much & don't get to touch these very often anymore)

Would it be possible to do a "halftone"? It worked for newspapers for around 100 years

Does an ej-640 have media clamps?

I don't think we have enough info, even for an intelligent guess

If anyone had a used head that was any good, it would still be in a machine printing It is practically impossible to flush a head thoroughly enough & we do not have "storage solution" to allow a potentially good head to "sit on the shelf" "Time is your enemy" as they say. By the time someone...

To answer the original question, YES IT MUST BE PAINTED. MANY PRIMERS (I can't say all) ARE NOT NECESSARILY WATERPROOF ask your friends from auto body shops, if you prime an automobile panel and leave it UNPAINTED, the panel will most likely RUST through, under the primer. considering MDO's...

Best advice you will ever get!