Search results

crack in the manifold seems like a likely possibility. this is not yhe end of the world. i keep a spare manifold in my cabinet, because it can be easy to cravk the nipples YOU CAN ALSO switch the manifold fromthe old head question 1:idid you change danpers? 2: what happens is you shoot some ink...

there are 4 ip ranges that are NON-ROUTABLE (meaning they do not exist ON THE INTERNET [meaning they have not been SOLD to someone by a registrar]) one of my larger clients had their internal network setup as 194.44.22.xxx since the early 1980's in 2006 we finally had to resubnet them when...

for many things, yes for certain types of cleanup, i have used the larger alcohol wipes for well over 20 years cleaning zebra thermal heads, for instance old habits die hard

i use those 6"x 7" alcohol wipes cvs & walgreens sells QUESTION: Why do they call them "alcohol wipes" when they are bone dry when you open the container?

really? i will give it a try

we built one, after seeing whatbthe granite counter people behind us use. I DON'T LIKE IT. great for mdf and plywood. coro and sintra "bow" or warp. never flat enough to run through the flat bed we made some shelves 98.5 x 48 for 4x8 rheets to lie flat (not sure if i like this either)

great! i know in flexi it takes next to nothing to lose communication doing a test print from front panel & not doing setup AGAIN for instance

the computer is 192.168.5.150 subnet is 255.255.255.0 printer needs to be 192.168.5.xxx (anything except .1 0r .150 as they are already taken if you are disabled, go to the control panel network and internet network & sharing change adapter settings right click ethernet adapter & enable

169.xxx.xxx.xxx is not an ip address, it is telling you THERE IS NO ADDRESS ASSIGNED, or one that can not be reached

i have not had any probllems with this YET but i was concerned, as we get busier, if we buy pallet of coro, the increased static taking the sheet off the pile. it seems to dissipate as it sits i have been a tech for 50 years & am well familiar with the damage static does to electronics i get...

i always recommend them, when someone has static problems. probably my next acquisition ( i love new toys!)

we do loke our air conditioning. keeps humidity down

i good friend was a high ranking person at AIG, before "the end" he had an eye doctor in bayonne or jersey city (20 minutes from NYC by path train) they indicted ann ( the doctor) and actually had private investigators providing patient counts for 6 months prior to her arrest

how about jetbest? they probably have the setup where the bottles invert & go into the bulk containers we use them for our old roland with no problems. i would PHONE IN an order and only place it if they could tell me the current expiration date on inks currently shipping. if you expect the...

very impressive no, my cnc can't do that but, i bet my stratasys 3d printer can you know what REALLY IMPRESSED ME with stratasys? they can 3d print SPRINGS

yesterday i printed about 15 4'x6' 4mm coro sheets we cut them a few days previous, wiped them down with large alcohol wipes a couple times and printed all went fine this morning i am doing a handful of 4'x8' for the same customer. when i removed the first sheet from the cart, there was quite...

we buy from a fairly expensive kosher deli that has 2 cash registers, side by side, one for cash, one for credit cards

keepng the head WET is important to minimize additional damage lets not ruin the head IF IT ISN'T BAD

be VERY CAREFUL to remove all ink rom the spill it should clean up with isopropyl, remember the ink can dissolve the insulation on ribbon cables & it is electrically conductive be very careful to clean the circuit boards and fully allow to dry (flush the sockets the ribbons plug into) keep the...

i have never touched a vp540, but, the fact that it shuts down when trying to print would suggest that one of the power supply voltages is "spongy" (weak) and dropping out when you attempt to print without trying to print, can you simulate all the actions that happen during the printing cycle...