Search results

Joe, Thank you for your assistance. You are most probably correct on the follow up. Dealing with Roland and this machine makes me never want another one! I think from what I have found is that it is the blade holder and the cutting strip. The cutting strip has a gouge all the way down it which...

Joe, It was not fixed. I don't normally run the machine myself. My designer usually handles it. It all started back in March of last year and after replacing almost everything in the machine (i think everything), a tech from Bell and Howell finally said 2 of the pinch rollers were cracked which...

I am curious of your problems. I have not seen where you have listed nay problems you are having. I am currently having problems with my VG-540I with cut force. I can say at this point with my problems with the machine and ROland, I won't buy another one from them. This has been a nightmare!

I am in need of some assistance. I have a Roland VG-540I that is having problems with cutting. My latest is pressure. It is like it changes itself every cut. I have put a new 60 degree blade in, and adjusted the height accordingly. I set it to 70 grams of force to cut through laminate and vinyl...

I'm trying to match the existing signage in the community. I've found many that are close in certain aspects, but not quite right.

.

Can anyone ID the this font? Or know a decent alternative? Thanks.

Thanks guys

Need help ID'ing this font or a suitable alternative. Any insight would be greatly appreciated.

Gotcha. Thank you for your input. Everyone's input has been greatly appreciated!

I agree on not monitoring the activity. Do you pay the commission on the mover all job or just the material?

951 is what I use. I like the 751 but it just doesn't seems as flexible as 951. It almost seems like it as a calendared feel to it.

I want to thank each of you for responding. All is very helpful information. AMS your information is most beneficial to what I am looking for. I would like to hear more and from others. I understand different areas geographically things are different and different size companies. I am a small...

I know in South Carolina and Georgia neither state has any requirements for a sign company to have a certification. Therefore they only require you to be registered as a business with the state. Some municipalities within each state will require engineering on some signs depending on size and...

I would like to find out a little about the industry and how you handle paying a sales rep for your business. I am assuming (yes i know what that means) you pay a base salary and then commissions on t he jobs they sell. my more detailed question is do you pay commission based on the total job...

I am looking for a vehicle template for a 2016 Scion IM. I am not able to locate one. I am currently not able to look at purchasing outside of USa due to limits on my bank card(s). anyone know of a site that has one? Thanks

I took a gamble and ordered my from Amazon. It was a brand new Epson DX4 ecosolvent head for my Roland SC545EX. I was lucky enough to have a roland tech installing my new Truvis printer and asked him to install the new head on the old printer. He checked the head and varified it was a new (not...

Can anyone assist in the id of this font?

I have not tried without cuttingmaster. I have not had many issues at all with cutting master through coreldraw. This is only the second time something like this has happened but I can not remember the resolution for it from the first time. Hopefully today we will have a resolution!

It seems so far what I have found out is something in my computer is blocking the download. I had the guy who installed the printer dial into my computer last night and was not able to locate the driver for the plotter even though cuttingmaster is seeing the plotter. He went to re-install the...