Search results

For the wrinkles you have to adjust the release and takup tensions, in the advanced menu. For the reflectives you have to choose the white underprint in marks..

Start with a used digitrim, you can get one for cca 3-5k, if you have luck under 2k. If you do more then 10 posters a day, after one week you will wonder how you could live without this..

HI in my opinion cuts on a fotoba (or any other cutter with circular knifes) are much cleaner as the ones on a flat bet cutter where you have regular knifes installed (we allso have a FB cutter) When buying a xy, i would allways take one with the X-squaring correction (i think is only available...

Just curious, you made research so you might know: 1. What media can be printed with latex that colorado cant do? 2. Is the ink change to 460 just empty the old and fill the new or allso some firmware upgrade? Do the bottles have chips on them? If not you could easy swap..

save the file as EPS in corel draw. then drag the file to colorcontrol. Should work.

There is no banding when set up correct.

The R1000 is 64" wide as the latex 365... so what do you mean smaller?

Macsign cut is free for summa users, at least the light version.. i run winplot on my mac with parallels desktop, works great

Very popular here in europe is lamidesk.. Allso the best looking machine imo http://www.lamidesk.cz/products/easy-shift

you can refurbish the rollers by a company that refurbish offset rollers - they grind the old silicone down and re-siliconize the roller. The cest in our country is about 300$ for a 160cm roller.

that could be - logo is allmost the same - and they sold the music-part to harman..

It is the blickle hrig-poa 72g. Theinstalation takes 30 mins, releveling 10min.. It has the same dimeter screw like the original summa feet. Sometimes i even do not relevel.. Summa surely says it has to be releveled but it works allso good if its not dead on level..

With the new GoProduce software it is even more fun to work with it! the workflow is twice as fast in my opp... We allso added some blickle wheels, because the shop is small and we need to move the machine time to time.. (allso the pump is on rollers).

My fuji acuity led lamp is rated 10.000 hours..

Ferrari stamoid decolit 251bw

Can you tell the difference in quality, maintenance etc betwen this two heads (kyocera and gen5) - because you had both and as i understand in simmilar machines - so you can very good compare the heads.. pros / cons would be great.

yes, allways better to save eps and pust it manual to CC. what yellow did you use? sunflower or golden?

This is more a job for a label press like hp indigo or xeikon.. you could all so print it on a toner based printer/press. Not really a job for wide formar printer..

For fine art i would take a used durst omega 1 or 2. They can print up to 1728dpi.. you can find a good one for 30-50k Allso jetrix is a great fine art printer.

I have 2 allmost new white heads, and some color.. pm me if you need