Search results

You can see it in Dashboard, or from the panel on machine, under advanced settings for your media.

I have 3 running in our shop, and getting a new one next week. They have been great for us, very little issue. What are the print settings you're using?

When ever I've seen this error, it's related to the meniscus. If the filters are no good, there is no negative vacuum keeping the ink in the heads.

Thats odd that it doesn't give you the option.

You don't need to clear the error, just when it comes up just select will keep using parts. No need for the service unless you need have it. Cancel it, just let the error come up and select use parts, resets for like a week, then comes up again. Doesnt hurt the machine, I've had it on mine for...

I have this one at the moment, it's just a recommendation to change supply tubes, but if you open up the top covers and see no evidence of ink linking, just tell the machine when it prompts you that you are going to continue to use the part. If yo uhave the service program you can reset that...

Most likely the meniscus is the problem. The filters for the meniscus are the white disks in the print carriage. If you have spares, try replacing those, should take care of the problem if its filter related.

If you go thru Epson, yes its expensive because they only use 1 company for service, but anyone that sells Epson printers often have they're own techs. You should be able to find someone closer to you easily.

The 2 closest techs would be in NS most likely. Grimco and Spicers both have Epson techs, its just a matter of if they have them there. A nozzle test would be great to see if its head related. Damper can be the issue, but make sure it clean inside machine, clean the media guides, check capping...

Try a full power cycle, not just normal shut down. Power it down, unplug it, hit the power button for like 10 seconds. Plug it back in and try restarting it. These codes should only happen during debugging, not normal operations.

You should be doing it weekly, also dont turn off your machine when not using in case you were. There is auto cleaning and ink circulations that get done on its own.

Only thing I found was a debugging code, not supposed to happen outside of testing phase of machine. Says to a full shutdown and see if that clears the issue. Maybe do a power cycle as well, won't hurt. I find that that helps with somethings.

Had this happen on our machine, and yes the firewire cable was the problem. Fuji replaced it and never happened again.

I think you got your models mixed up there. The 40600 is 16K$ but the 80600 is going for 25K$.

Your nozzle tests are coming back with nothing printing in the CYAN?

I run 3 of them, very few issue over several years of running them. I use Colourgate for my rip. Onyx is not my fav anymore, maybe 15 years ago, but not anymore.

Most rips will allow you to do this, but you need a tool to scan and make the profile. Pretty much anyone that makes their own use an i1 device for profiling.

Sorry, much to far for me.

If I were to send you the same test file we used, could you print me something on coroplast or ABS at a speed matching around 40 boards an hour and send it to me? I can send you our UPS account to ship to us with. We are anticipating the need for more press power within the next year, having the...

SwissQ has some nice features, but from what we've seen Fuji's colours are miles ahead of SwissQ's colours.