Search results

I use Flexi with my Summa F1612 daily. In the Production Manager go to Add setup. Then click on cutter > Summa > Go produce. It will ask you where to find the folder to send the files to. You will have to have a folder set up on the network to send the files to from Flexi.

You sir are a lifesaver, That worked great! Thank you so much for your time!!

Okay, I see where you are going with this. Let me give it a go. I will let you know shortly.

Adam, I got a small mark in the middle of the file. I get that part I am not sure about the rest. Can you go further into detail? Sorry.

Hey everyone! I have a new to me Mimaki JFX-200 and I am trying to print two-sided yard signs on a 4x8 sheet of corrugated plastic. Then I am running it through my Summa F1612. It seems like no matter what I do the image on the opposite side is off one way or another. Can anyone give me an idea...

Anyone have an idea what font this is. I found one really close but this “R” seems out of place or it’s been edited. Sent from my iPhone using Tapatalk

Yeah, I am aware of the challenges that come with a used machine. I have also found a couple companies that offer refurbed units with warranties. I am just trying to narrow down my search from the good and bad. Sent from my iPhone using Tapatalk

Thank you for the info and the size I am looking for is at least a 4x8. Sent from my iPhone using Tapatalk

I am looking to add a used flatbed printer to my arsenal. I am looking for suggestions on a brand that is reliable and good for a first time user. I am not concerned with speed as much as I am with quality. I am open to a hybrid or true flatbed. I will be using it mostly for ACM and corrugated...

Have a question. I am looking for a High Visibility reflective material to print on. Everything I come across is Latex or Screen print only. I have a Roland XR-640 and a Mimaki UCJV300. Any suggestions?

Can anyone tell me what font this is? I looked trhough all my fonts and even did a font search with no luck. Thank you

I tried that as well and they still do not show up after the software has fully installed. Sent from my iPhone using Tapatalk

Yes, I tried to uninstall and reinstall with no luck. I do not have support from the dealer as I purchase this machine used. Let me know if you find anything out on your end and thank you for the help. Sent from my iPhone using Tapatalk

No, I tried that as well.

This is all I get on my screen. Sent from my iPhone using Tapatalk

It is the F1612

So, I have just downloaded the GoProduce V1 software for my cutter and it did not populate any of the tools for the cutter in the menu. The only options I get are the Standard Router or the HF Router. Am I missing something in the process?

The switch has four wires coming from the back, the brown and black wires were backwards going into the main harness. Sent from my iPhone using Tapatalk

After some tracing down wires we finally found the “EMERGENCY STOP” issue. Some how one of the wires coming from the button was wired backwards. Im not sure if it was from the previous owner or what. Never the less we have the cutter up and running. I can’t thank everyone who commented enough...

We are doing that now. Sent from my iPhone using Tapatalk