Search results

Does anyone know if these jumpers are correct? This is the area where we moved the top jumper and are now getting an EMERGENCY BUTTON PRESSED” on axis control Sent from my iPhone using Tapatalk

Is there a way to by pass a button to test? Sent from my iPhone using Tapatalk

Here is what I am getting. Sent from my iPhone using Tapatalk

We have press and depressed all four buttons a few times Sent from my iPhone using Tapatalk

Okay. So, we moved the top jumper on the photo above. Everything has powered on and it’s working. It’s now showing up in Axis control but I am getting a emergency button error. Sent from my iPhone using Tapatalk

Here is a photo of the jumpers on the machine. I also forgot to mention this machine was hooked up as 208+N from the original owner. Sent from my iPhone using Tapatalk

Moved some wires and now we are getting these updated power specs. Sent from my iPhone using Tapatalk

Here is what I am getting on my voltage. Sent from my iPhone using Tapatalk

Here is a photo of my setup. Sent from my iPhone using Tapatalk

What I have for power is single phase 240 going into phase converter (American Rotary AD15) recommended by Summa. From the converter we have four wires. The voltage coming from the converter is as follows. 245v,245v,260v and a ground. From the little information I have received it does not need...

Yes, I will double check. Also, if anyone had a wiring diagram what would be great. I am hoping it’s just the wiring going to the machine. Sent from my iPhone using Tapatalk

We had a AD15 American Rotary phase converter installed by an electrician. I am pretty sure it was properly installed. Sent from my iPhone using Tapatalk

I just recently purchased a used Summa F1612. I just got it installed with a three phase rotary converter and and it’s not powering up. We got power to the machine breakers and the USB hub in the machine. It doesn’t seem like we are getting power to the power supplies. Can someone point me in...

We have a CWT 1630 and it is one of the best pieces of equipment we have purchased for the shop. Give Mike at CWT a call. He will take care of you. Sent from my iPhone using Tapatalk

I am having the same issue with mine as well. I know for a fact that some of the issues people are having is due to a cable issue in the printer. This is an issue Mimaki is aware of but not fixing it unless you are having certain “issues” with the printer. Mine was replace with a new shielded...

I have a Roland XR-640 and a Roland GR-640. I am evaluating a copy of Onyx and have run into a few issues and wanted to see if anyone else was having the same issues. The first thing is after I print something and take it to my cutter it will only find the first mark. The second thing I have...

I ordered a Roland DX7 Print Head From a Merchant Member. Come to find out they were out of stock and sent me one for a Mutoh instead. My question is will this work in my XR-640 or not? I know it's the same print head but I have concerns about if it has the same firing pattern. Does anyone have...

Here is what I have and I cannot find a match.

Here is what I have.

Can anyone identify this font?