Search results

why bother w CISS? Just stick some refillable carts - they go for $60 a piece, you need only 4 - you can leave the MK where it is - the chip resetter is about $80 - you need 2 - one for carts and the another for waste tank - you can actually "refill" the waste tank.

Another shot in a dark - expand the image to compensate shrinkage?

little bit OT, but still...I print on ceramic tiles w water based inks and my post is powder coating - don't know what will happen to UV inks but it's worth a shot...I think. Good luck!

laser?

My experience is with waterbased inks - don't know about your setup - I finish one side (ie, clear-coat), let it dry then go for the other side. I use a low tack waterbased spray adhesive from Aaron bros - don't remember the brand, but the clear is easy to clean afterwards - just wipe w a wet...

lo tack spray adhesive?

PM sent. Tnx!

Anybody? Hello! Why am I being ignored?

check them out: http://www.digicoat.com/ - the make/sell sublimation coatings - have tried it in the past, works great. Good luck!

Hi folks, I need some printing done on Ricoh gx7000 - some means only about 10 sq. feet - of my media/files. Have a project that requires a lot of ink - and I think Ricoh lays down really thick ink. The kind of ink doesn't matter - be that sublimation or whatnot...Silk screening out of...

Just an idea for you guys to consider - why not to print on veneer and then mount it on the board? those things are pretty flat. I do that routinely on my homemade flatbed with pinch-rollers- converted Mutoh RJ900, Artbot is right, pinch-rollers suck big time, but it's just an inconvenience -...

Hi all, have an epson stylus pro 7800 for parts - anybody wants it? The head is shot, don't want to bother w cleaning. I'm in Glendale Ca, so pickup only. please call for inquiries 818 640 4640 Rubo

http://www.magnummagnetics.com/wide-format/ - they claim having aqueous inkjet materials. ???? Good luck.

Sepiax ruined my 7800 - the heat that supposed to dry the inks does just that - dries the ink...in the printhead - after 3 hours of nonstop printing it just stopped spitting ink. No amount of power cleaning helped. I built my own heater, it worked beautifully on short jobs. Apparently it's a...

I sure do. Here it is. Let me know if you have more questions.

not of these -all sold. have one for you in my album: http://www.signs101.com/forums/album.php?albumid=414&attachmentid=108718

Happens w my Mutoh occasionally - don't want to bother to find out why - just make your file longer - leave some blank space on the bottom - longer than your 4% remaining - it will print the whole image and stop (if) but you have the image printed. Worth trying.

glue a strip of paper to the leading edge of the film - couple of inches wide - then offset the print - sharpie might be too thin - or not.??? I'd try it...Good luck!