Search results

Now thats funny nomatter who ya are :0) Welcome from a newbie :signs101: Markus

Thank you for the info -- it would seem thats all the machine I can get at this point. No more Ebay for me on purchases like that :0) Markus

Good morning folks, I super appreciate all the info,support, and politeness of everyones responses :0) Noone has recommended a machine in the $6000- $6500 range that might serve me well to start with :thankyou: Markus

Thank you CheapVehicleWrap. I have been cutting only for a few years and currently do enough to keep all stock rotated. ROF I cut stuff just to cut. I also do remote aiplanes and helicopters, slot cars, RC cars etc. trucks etc. I would like to keep back up ink and common cast on hand -- the...

Howdy Red Ball -- thank you for your response I currently have a 24" plotter only I have been doing cut only for a little over three years -- multiple layers etc. Im am fairly comfortable with cutting only so far. Sorry if I didnt mention that. Thank you, Markus

I have $2500 budgeted for start up inventory. I have also aquired smaller things I would need like banner dies and grommets, 32" cold laminator and have use of a 42" Have some rolls of most common colors (roygbiv)and various other small items over last few years. I dont need to start large or...

Howdy forum members, I have introduced myself and read till my eyes bled :0) -- great site and such great information. I am currently at a crossroads where my employment (carpenter) is going to be closing their doors. I however have an oppertunity to open up over my current shop and have use...

thank you fellas for the speedy replies. I was mislead in my opinion as I asked a specific question and got a generic answer -- from themnot you folks hehe Markus

Thank you for your answers and time -- I think I have been dupped -- the HP rep told me it had a cutter and was a complete unit. So didnt the seller. Howdy, I did recieve the freight quote and appreciate you sending me that. I been researching some and thats why I hadnt gotten back to...

Howdy Ladies and Gents, My name is Mark -- I am considering purchasing a HP5500PS -- the HP folks told me that there would be support for this printer for an additional 5-6 years. I need to start somehwere and thought this my be a good start for short term indoor signage along with some...

Can you use the weld feature? ---Should have read before answering :0) Markus

I am using a Designjet 5500ps so 42" is max for now, well and a older Vinyl Express 24" cutter. Thank you for the tip -- is there harm in making it larger? I was just going to make it 4x8 ;0) The lights are 4'ers as well. Would it be possible to get a photo for example purposes from those...

lol gottcha on the "dropping stuff on them" thanks for the pvc tip :thumb: Thank you, Markus

Thank you -- I wondered about the cutting and going through blades. I cut a few items on a small piece and it was soooo smooth and glide"y". I also thought about possibly adding a light under it for a light table. Just incase I ever needed one as I am going to have to build a table anyhow :0)...

Do you think glass is a good working surface for a weeding,cutting table surface? I think I can get a 4x8 sheet from a buddy that has a glass shop cheap. He takes stuff like plate in for salvage. Or would those of you that have tried explain if its a good surface or no-- This may seem like a...

Thank you for all the welcomes -- I been busy reading and soaking up what I can. A brief background is there is not much :0) --I have been a local contractor for 25+ years while playing part time vinyl (cut only) -- IE election signs, contractor signs along with some store fronts. It all started...

Having dabled in the cutting only aspect for a few years part time -- I have yet to hear of the 3" lettering other than commerical vehicles on interstates and NYC. DOT approved type vehicles -- glad ot hear of this tho -- I am going to check into it. There are many many vehicles here in...

Howdy folks, Mark here from New York USA. Im sure I will have some questions coming here soon. I am in the process of buying a turn key operation and I have never printed before-- I am a lost art of layering hehe. I have messed with htis guy at his shop (hes a friend) so know thegeneral...