Search results

WOW..................Nobody said anything bad about this guys or gals cutter. That rant was a little unexpected if you ask me. Unless you take "CHEAP RUBBER" as an insult.

Welcome again from PA!

Maybe this will help you.

:thumb:

Artcraft URW T Bold

are you scanning the pic or is it a picture?

Here is his pic.

it needs to be saved as a rgb JPG file to see it on the forum.

Can you get a better pic of him? That would be an easy one to trace.

Ken, his post is in the "General Software" area. That is what this is for, to help people when having problems with software. Vista is software. Not trying to be rude, but more than just signs and sign software can be talked about.

Thanks George, but I have already checked there. Bolted Bold is close but not exact. A few letters are different.

Customer wants this font. Any ideas? I just can't find it. We have found some close that with modification will work but we have to do 30+ differant decals and would like this font if possible. It is the JATO font.

Welcome from PA. Is your office in Selinsgrove or Erie?

You set up a ce5000 the same as a ce3000. Here is the link to walk you through it.

Just set it up as a CE3000 and it will cut fine. If you are going to cut printed graphics let me know and I will explain how to set it up for that as well.

Your Welcome!

I don't see an exact match but here are some close matches that might work for you. Dafont.com

I tell you how in my post #2

Start your cutter like you are setting it up to cut. Once it it ready to cut press "pause", then press "next" until you see "command" then press "enter". It probably says GP-GL. Press the up arrow so it says HP-GL then press enter, enter, pause and you should be all set.

I do believe there is a spring system inside that is sticking. That is why it wont slide up on it's own. Open it up and clean and lubricate the moving parts very carefully and it should work fine for you.