• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1.

    I am so SICK of this problem!!! (lettering not sticking to painted walls)

    Depending on humidity, fresh painted walls take a while to cure. Go over it with a rivet brush to help stick it down

  3. Aluminum with Cut Vinyl Clear Coated

    IMO it should last a long long time

  4. Roland SP-300i Print & cut registration

    Try cleaning your pinch rollers with rubbing alcohol.

  5. Accidentally wrapped truck in 3M 40C, would that hold?

    Sorry I didn't know that. In that case maybe let it go and see how it goes.

  6. Accidentally wrapped truck in 3M 40C, would that hold?

    Put yourself in the customer's shoes. Would you want your truck wrapped with calendered vinyl? No, you wouldn't. You could admit the mistake and offer a discount or offer to re-wrap
  7.

    BN-20 Print

    Are you sure they gave you the same printer that you watched them use? It looks like the print head is bad.

  8. Need Help ROLAND GR-640 -Won't move past 3rd crop mark

    What's your print width? Anything over 51"w does this for me.
  9.

    Roland VersCAMM SP-300i Carriage Separation

    Replace the encoder strip
  10.

    Please help me

    To me it looks like the printed line is skewed but the cut looks good.

  11. Laptop recommendations

    Slow and cheap: $300-400 Medium-ish: $700-850 Good and fast: $1100+

  12. ROLAND TRUEVIS-SG-640

    I wouldn't use white lithium grease. It gets too gummy. For how new the machine is, it shouldn't need greased at this point.

  13. weird issue

    Did you use Christmas lights instead of sign LEDs?
  14.

    Cutting out a picture.

    In flexi, use Bezier Path Tool (hotkey: P) to trace around the edge of the green. Then select both the photo and the square you drew, and goto Arrange-> Mask. You can also rotate the image in Flexi so it's straight.
  15.

    Question Importing PDF with text as curves has slice in characters

    Different node types from different programs don't always import correctly.
  16.

    SG-540 on TR2 Inks - Blotchy Reds/Magenta

    60 degrees is kind of cold for the printer. Our print room is typically around 67-72 degrees and so far the TR2 inks are much better than the old TR. The heads stay clean with TR2, where TR kept gunking up the heads constantly. Environmental conditions definitely effect the printer.
  17.

    Metal Gemini letters on siding - peaks or valleys?

    I wouldn't even worry about where they put the studs. Some studs on peak, some in valley, some might even hit right on the edge of the peak. Just never been an issue for me personally.
  18.

    Need Help Installing indoor signs from suspended ceilings?

    Maybe use thin steel cable from the hardware store, and anchor it to a dowel rod or something above the ceiling panel.
  19.

    Design ideas Help

    Put the name across the top and shrink the logo down pretty small and put it beside the name. Then do a huge digital EMC below the name.
  20.

    SG-540 on TR2 Inks - Blotchy Reds/Magenta

    Could be temperature or humidity changes in the shop.

  21. Roland felt wiper replacements

    https://www.walkersupply.com/shop/category/printer-accessories-and-maintenance-roland-printer-accessories-and-maintenance-roland-wiper-blades-and-felts-685
Top