Search results

Well the last nearly 2 weeks have been rather testing and I have learned a lot. I have watched the technician we had in and the only thing I can't do is test the main board. All he did was check about a dozen points for continuity and deemed the board as probably good and after replacing the...

YIPPEE HOORAY WOOHOO. My printer is working again!!!!! I got a tech in and he checked the main board and found it to be OK. Then replaced the head cable, print head and cleaned up and done a bit of maintenance on the station and it's like new. :) I am a happy bunny :) :) :) It has printed non...

Has anyone got any ideas on this one? SC

Personally it is as big or deep your pockets are. We all have wanted or seen an ideal design computer but most of the time it is out of reach. I believe Signburst do some unbelievable spec machines but at $5400 for their supernova model it is out of most sign guys reach. This is an openended...

I have a new main board, cable and print head coming for our VJ1604. My question is If I install the cable and head into it without the main board will I be able to test these without causing them damage? The reason being if the fault is in these items only I can return the mainboard if it has...

Seems very pointless being green and recycling anything if everything is made down this specification. I mean if we were to go out and buy the latest latex printer and for that to last only five years it seems hopeless trying to sell it as environmentally friendly if we have to throw away the...

I could get 2off generic cables for £5 or 2off off mutoh cables for £64 which is a bit more but I don't want to be stuck with a dodgy cable. I am just a little bewildered why mutoh have not heard of such items as surge protection or even a simple diode so as the current cannot loop back and...

OK then. I have been told by a tech that when the head or cable has died and is causing the print I am seeing now it needs the head, the head cable and a new main board. What my question is "is how or why a cable or head goes bad can it damage the main board"? Or is it designed to just cost a...

I could understand the cr cables as they are always moving but the two head cables must be very uncommon to break. SC

I have a friend in Texas who has the same machine. Where are you as he could help? SC

Is this the long cable of which their is 3 cables together or the 2 cables going to the head? Thanks Sean

Where does the cable wear? Sean

OK Stephane Can you quote me for a new printhead, dampers with O rings, head cables, wiper, & capping station? I think that is all! Do these parts come with fitting instructions and the head rank? I need it for yesterday!!!! You can PM with these. Cheers Sean

Right guys i have replaced the F2 fuse which has got the printer printing again, the only trouble is there is a magenta block around/on top of everything. Also another observation is that when we do a nozzle check (even though it also prints a magenta block all around it) out of the 8...

I would guess a dirty or damaged encoder. SC

I have used digiprint before but that is one of the most expensive heads in the world! For that price I would want it supplied and fitted!! SC

Thanks all Nebula Italic it is. SC

Anyone know what one this is? It is on a football kit SC

I am having a little issue with my printer and until I can get some board fuses I am just thinking ahead. Where is the best/cheapest place to buy a printhead and cable from? I am based in the UK but do not mind international delivery. Many Thanks Sean

Thanks for that Chris. Is it OK to test the fuse whilst it is still installed ? I have ordered some fuses so here's hoping. Sean