• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. how to start up jv3 in service mode?

    After installing new head, tried to put printer into service mode to enter new head id by holding function and remote keys while printer was booting. Printer started as normal. DO I hold buttons down before power button, after "booting" shows, or wait until after version # shows? Test print on...
  3.

    trouble with jv3 new head id

    I just installed a new cyan head. Mechanically, all went well. tried to put printer into service mode to enter new head id by holding function and remote keys while printer was booting. The "input head #" screen never came up, the printer just started as normal to the "roll-sheet" screen. Did...

  4. Is anyone using 3rd party ink for jv3

    Is anyone using 3rd party ink for jv3? I have only used Mimaki ink. Any recommendations of what works or what to stay away from would be appreciated. Thanks

  5. Is anyone using 3rd party ink for jv3

    Is anyone using 3rd party ink for jv3? I have only used Mimaki ink. Any recommendations of what works or what to stay away from would be appreciated. Thanks

  6. jv3 head replacement

    According to head replacement instructions, new print heads are shipped with a waterborne solution that needs to be flushed to prevent clogging. Is the solution to flush the head cleaning solvent or a special solvent specific to this procedure? Thanks.

  7. bad test print on magenta head

    I have a jv3 160, when I test print, the magenta prints 100% on side and only about 2% on the other. I've done several cleaning cycles and nozzle washes. Could this be a cable issue? Any help would be appreciated. Thanks...

  8. JV3-160SP (ink goes through heads but won't print)

    After not using printer for a few weeks, test pattern printed poorly. I ran a few clean cycles and got yellow,cyan, and black back to 100%. There was c,y, and k ink in in the caps, but the magenta cap was dry. Soaked heads for 99 minutes and left overnight. The next day, the machine showed a...
Top