• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. STS SS21 Inks

    I have sold over 400 cartridges (440) this year.

  3. Need Help Did anyone running a Mimaki CJV printer resolve the error PCB V42-1 ?

    1. Check the output pressure of the DC power supply (42V) and the DC power supply (5V). 2. Replace the power supply above. 3. Replace the MAIN PCB with a new one
  4.

    Discussion I've owned an HP R1000 since April 2019, ask me anything

    Does anyone have the service manual for R1000?

  5. Mimaki JFX200-2513 Aftermarket Heads? DigitPrintSupplies?

    All Digiprint Supplies JFX200 printheads come in a Mimaki box with Mimaki paper work.

  6. Should I purchase a DTF system?

    Before purchasing a Direct to Film transfer (DTF) system, consider the following factors: Compatibility: Ensure the DTF system is compatible with your existing hardware and software infrastructure. Functionality: Evaluate the features and capabilities of the DTF system to make sure it meets...

  7. UJF 3042mkii - constant flushing and circulation

    Reload last back up of parameters.
  8.

    Need Help Mimaki CJV 150-75 , been error for a month , error code 52a and 187

    1. Check the assembly position of Linear Scale and Encoder PCB Assy.. 2. Check Linear Scale (scratches or dirtiness or so.) 3. Replace the Linear Scale with a new one. 4. Replace the Encoder PCB Assy. with a new one. Did he replace encoder PCB? YSTEM HALT (*) 509 : HDC POSCNT HDC position...
  9.

    Mimaki Grainy Prints

    Pre print and print temperatures are too low.
  10.

    Head Print DX7 L440 x M015373?

    L1440U1 is the head you want.
  11.

    Mimaki CJV150 mottled print and fuzzy test print

    This is usually temperature. Either too hot or not hot enough. The pre heat and print temps are what you need to adjust.

  12. Opinion JV150-130 Ink Options

    www.digiprint-parts.com My ink made in the USA
  13.

    mimaki jv300-160 not going back to home base after print

    Clean the encoder strip

  14. UStech MVT600

    Our laminator is stuck with the pressure roller in the up position. Anyone have a service manual or a way to fix it?

  15. JV33 MAPS

    I have them. Hand851@gmail.com

  16. Question Guess I was scammed - Where does the machine report data is stored?

    Page 80 of the user manual

  17. Need Help Roland SP300i Manual Cleaning

    Roland VersaCamm SP Series: Manual Cleaning - All Graphic Supplies - YouTube
  18.

    CJV150 not printing orange or light black

    Do an over night nozzle wash. In the morning one ink fill. one soft clean.

  19. JFX200 2513 Ink Supply / Error 61b - White

    ERROR 61b SUPPLY INK:12345678 Ink filling into the sub-tank has failed. 1. With [#TEST]-[SENSOR], check the detection status of the target liquid level detection sensor. (Also, visually check the float position in the sub-tank.) 2. From [#TEST]-[AGEING] - [PUMP MOTOR], discharge ink in the...

  20. Need Help Mimaki 3042mkii - 11f System Halt

    SYSTEM HALT (*) 11f : PCB SLIDER No Slider T PCB 1. Turn on the machine power and check that the slider T PCB LED13 lights up. 2. If not, turn off the power and remove the head FFC (CN101 to CN108) from the slider PCB. (Be careful that the FFC contact part does not touch the PCB.) Turn on the...

  21. Need Help Mutoh 1204 print head

    Hope this helps
Top