Search results

dypinc is correct about how to print black with a latex 300 series printer What you want to do is set the RIP up so that when you send black up in the file, it is set as 0/0/0/100. Black only. Then, in the RIP, go to the settings for the workflow and turn on "pure hues". In Onyx this is in the...

I have run most static clings on all the latex printers, runs fine, run lower curing temps than SAV is the general rule (lower temps, clone and increase pass mode one step, drop a little global ink if needed). I usually use General Formulations clear and white, also Flexcon has a good film...

All Latex printers work by adjusting speed (pass mode), temperature (curing, specifically), and inkload (how much ink is set in both the restrictions and the global ink limits). What is happening is from too much heat, mainly curing, but possibly some drying temps as well (generally, drying...

The color bars should fix this (read the bottom, looks like it did). The machine, when printing long runs of a solid color, then has to switch quickly to another color, and the heads may not be quite ready to switch because that color has sat idle for a while. The color bars keep all the heads...

First, as has been suggested, run a print-head alignment, use the manual alignment just to make sure everything is perfect. Some SAV prints sharper than others, check against other brands to make sure you don't have a sub-standard SAV. Choose a media preset from the HP Media Locator that...