Search results

Try CET color & Vanguard digital.

Try putting two layers of pre-mask or transfer tape on the face (I believe you cut these with image side down) then using a caliper measure the thickness with the pre-mask on. Say for example if it reads .45” tell your machine to cut .44” only. This will clean your edge all the way and leaving...

Hi Alamo, our company went with the Vanguard VK300D-HS because of the reliability of the industrial Kyocera Heads and the speed the 10 Heads can pump out. We also were lucky enough to get the Colex SXC1732 flatbed cutter. In my opinion, this machines is really top notch and they have an ongoing...

Hi, just replace one of the plugs. There are two power sources. One is for the electronics, while the other is for the heater and fan :) let me know if this works! sometimes the power source for one of the plugs may have tripped a breaker or something.

A valuable tool especially when doing color corrections, just apply on the first page and it automatically is applied to all pages

You can also go to the preview tab, (2nd tab) there is a page selection area, just click the page number you want and press apply.. previous versions of Onyx would scale artboards if your artboards have different sizes and caused a lot of issues. Now with Onyx 18 onwards, even if your artboards...

Just to give everyone an update, we have received our print samples from EFI and they were great. Really great adhesion on their inks. Even if it was a virtual demo, they were kind enough to use the substrates we requested and the files we provided, definitely a formidable machine and ink combo...

Thanks! Will definitely reach out to Digitech and add it to my list :)

Hi, We are currently in the market for a printer upgrade. Current equipment we have are HP latex roll to roll printers and a CET 5’x10’ UV flatbed printer. We are happy with the HP’s and want to upgrade our current flatbed. We are looking at the following: 1. HP R1000 Plus Latex Hybrid...

- my thoughts exactly.. I don’t mind if speed is slow on a 5 layer print (every other printer is slow anyway at this mode) but these are seldom used anyway but nice to have the ability to do this :)

Was wondering if the hp700W can do blockout 5 layers cmyk-w-k-w-cmyk?

First thing I would check is if the printer is printing in correct scale? Since latex printers rely on high temps for curing the vinyl stretches and contracts as it cools down. Onyx has a scale adjust in their profile manager to fix this. Not familiar with flex since all our machines are run by...

I would highly recommend Vanguard Digital based in Atlanta. Awesome machines, Great customer support, and easy to maintain. Dave the president is very helpful. good luck!

Hi Pam, I would recommend 3M 3920 high tack vinyl. You can apply any UV overlaminate on it and the high tack adhesive will make sure it won't peel off even in cold weather installs.

Overspray deflection caused by static issues. You may need to wipe the board first completely with a water/iso mixture of luke 70-30 ratio. You may want to introduce a humidifier to add more humidity if the air around you is dry. (One good way to tell is if you receive shocks when taking the...

Excel estimator and project tracker HI there, Think you can share what you have accomplished with just using excel? sound interesting :)

We are Scott Paragon Signs! Just want to give a shout out to everyone on this wonderful Forum! We offer the following services: Tradeshow Graphics Vehicle Wraps Metal Fabrication for signage and Kiosks CNC routing services Our equipments are: Oce Arizona 4x8 Flatbed Printer HP Latex 330...