• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Opinion Name this banner material!

    Looks like fabric mesh run dyesub.
  2. DPI, size. PNGs

    PNG files are usually off of cameras. It's a humongous file but a 72 dpi. It's meant to be scaled down, so a 50% reduction would raise the dpi to 150.
  3. Onyx Thrive RIP — issue with masked cut lines

    Are you able to flatten the artwork thus eliminating the layers on layers issue you are having? Can you send them as two separate files? One for the print and one for the cut? It has to be a layering issue. You could also try merging the the cut lines on their own separate layer so it is one...
  4. Suggestions Adding slitters to roll laminator?

    I once had used a couple of those cheap plastic letters openers with the razor built into it. I was able to drill a small hole to mount them onto some adjustable guides I had taken off an old folder. They weren't perfect but once you manually got it started you were golden.
  5. UJF-6042 Problem with Magenta draining

    SubTank and/or +/- Pressure Air Valve. What are the readings on your positive and negative air pressures? What are the readings on the Mag SubTank?
  6. Mimaki cjv150-160 New epl3 Board Upgrade - Error 203 ment commant

    Why on earth are you Frankensteining that printer? Anytime I hear of a customer attempting to do anything with the parameters, I get nervous, but hey, It's your machine do with it what you will. In addition to what Solventinkjet said, I would suggest that when installing the FW updates you do...
  7. Need Help JV150-130 Black color fading as the sheet prints

    Why isn't the color changing on the "trip" in Ztrip or the buckle up logo? I know it's probably 4 color k but If the black was truly running out wouldn't those two show degradation too? I'm on mobile so I can't see the pic that well. What RIP are you using? How many up are you running?
  8. Duplicating Tiles to print in Rasterlink

    I believe you'll want to use the nesting feature.
  9. upgrade firmware on mimaki cg fx 130

    How are you connecting them to the plotter? USB directly to PC or over an Ethernet network?
  10. Need Help Mimaki UCJV300-160 - White ink spill

    It's one of the small blue rubber O-rings that is either pinched, deformed, missing or not sitting correctly when that plumbing joint was screwed together. Like Solventinkjet said common issue with this model but in my opinion it is an install issue. When I would install these I used to leave...
  11. Need Help jv33-130 issue

    Check that the head is capped properly.
  12. Mimaki Jfx200-2513 printer can not print out any of yellow ink

    When you do a cleaning do you see yellow ink in the cap? Check capping position (seal). I bet it's more than likely a bad sub tank/sensor.
  13. New Mimaki JV100-160 ICC help

    Did you try to get the profiles from your media vendors? I know general formulations make them as well as 3M and you might even want to call Grimco.
  14. Need Help Remove printhead JV300

    That's a bad idea.
  15. DISWAY WASH on the UJF 7151

    You're supposed to go through the service menu and flush all of the ink out of the of the machine completely (ink lines, subtanks, heads caps) to ship it. That means 8 bottles of flush. Just a disway wash isn't gonna do it. Then there is the matter of the yellow brackets and the special caps...
  16. Mimaki UCJV 300-160 / Cyan channel missing

    Usually when that happens, and there is not any type of error, the issue is with the head not capping properly. Check that the head is capping properly, It may need an adjustment and that can be done in the service menu. If you still have the install manual it explains how to adjust it perfectly.
  17. Mimaki CJV30-60 Continuous Damper Issues

    Check the head alignment over the cap.
  18. Window perf lifting in corners... solutions?

    3M Primer 94, live it, learn it, use it.
  19. Cured UV ink scratching off new signs - help!

    I concur it's gotta be the coro treatment. Maybe the sheets you are using were at the beginning or the end of the treatment run. Only ever experienced that issue when we had to use the cheap/different materials due to supply chain issues.
Top