Light banding on solids - UCJV330

[Goatshaver]

I'm getting some light banding in this background I'm printing. I saw it on another print that had an orange solid area. Seems to be with certain colors cause I didn't see it in some lighter blue prints I did a coupe weeks ago.
I've checked my feed comp and adjusted it and my drop position before the print. Normal speed seems to help and it's still there but less noticeable.

Any suggestions?

 

[Dasdesignguy]

What does your test print look like?

 

[Goatshaver]

What does your test print look like?

From what my tech said is that solids are challenging at this rate it's going to take 21hrs of printing for this job.

 

[dinomaskot]

You can send me the file to check if i get the same banding or not, that way we can check if its general issue, or just yours

 

[Goatshaver]

You can send me the file to check if i get the same banding or not, that way we can check if its general issue, or just yours

Thanks I've gotten it figured out. My tech said solids can be tricky. I got it worked out though, I printed colors patterns up both sides of the sheet and had to increase the vacuum to max and haven't had any of the banding since. *crosses fingers*