Search results

You are welcome. I dont know too much about the FX , but im sure its capabilities are better than that of the edge 2. the only thing i do from time to time is add a small stroke to some letters if they drop out. .002 in or less. Good luck!!

Hullo John, I work with a Gerber Edge 2 and have no problem getting 100 plus legible 1.5 to 1.75 mm serial numbers. you should be fine.

i did use the 2 mil setting, thank you for that. it was on the scotchcal setting. i can try a few to see what they do. the fact that most of our print jobs are two to 3 colors max is not complicated. but our tolerances are , at the maximum .03 in. and there is not tolerance for jagged edges or...

That correct. same foil , mat. and files. i have cleaned the printhead and dancer bars, squeegie, ect. and if you mean the file setting in composer itself. in the color settings, then yes . that is the same. i even tried to make the secondary color, (usually black) as hot as possible and it...

I am using edge ready for both the foils and the vinyl/poly. also, and i dont know if some people cannot see the earlier replies, but i have a second edge 2 that i have been using with the same settings and the same vinyl/ poly and foils , and the same file , and i get little to no drop outs. if...

Thanks for the info. I am still getting drop out in the smaller lines , borders and some corners here and there.

I am printing on both. but in the picture this is poly. the settings are the same for most everything i print on for both printers and all materiaL I dont really know where to adjust the settings in composer.

Yes. and the other printer i have , same exact printer will print this same exact image solid black , pretty much everytime. but there is a drop out in the printhead so i lose the bottom 2 plus inches of every job. thats why im using this one. i have also tried to adjust the heat setting to see...

I have attached two images . i may repost this thread with these images on here again. i m not sure the best way to go about this. once again, im pretty green at this forum thing. definitely not that green at printing. i did clean the head and the components per the guidelines in the book.

The software is Composer, the foils are Gerber Gauge or Zero Nine. i am in the process of trying to recreate the issue as we are a heavy production shop and i have moved on to our backup printer in the meantime.

Hello all. long time reader , first time writer. just recently purchased an Edge 2 with a new printhead with about 1200 mins or so on it. it will start printing fine then have issues with the secondary color. usually a black. cloudiness is all i can describe it as. almost as if there is...