Search results

Thank you Nicky for your reply, I will attach some photos and documents

Dear, We bought a new UV bossron flatbed 1325 , I'm asking for support and help if any technician knows about it. Thanks in advance

Thank you phil for your help, I will send you all the details by mail. Thanks

I want to ask where can I buy cutting head for summa S2 120 . Thanks

Yes I did that and the value of the encoder change each time you move the solenoid up and down

Thank you very much sir for your reply, I did the hardware test from the service menu all is good except when testing the encoder motor it gives error. If there is any way that i can check which part need to be replace , because its very expensive to try if the head or the main board . Thanks...

Hello dear all , I have a Summa S2 D 120 , I'm having problem with the encoder , Error message after turning ON , UP and DOWN encoder not working, reboot. I cleaned the encoder sensor and the strip still the same problem, any suggestions please. Thanks

There is no diagnostic Leds on the IO board its. Not like the formatter board on latex printer , I was reading also that it could be a corrupted job in the queue that it should be deleted , but I can not read the hard disk.

Thank you Joe, I clean every single connector with a special electronic cleaner still the same, I'm trying to imaging the Hard Disk to a new one maybe there is a bad sector or something stoping the initializing as netsol said. I hope it will work Thanks a lot for your help

But why the fans in the ebox didn't work if I plug the io board and work normal if I remove it,

Thanks anyway Netsol , I hope someone can help me in this

Thank you netsol for your reply, There is nothing in the service manual regarding this problem , I also brows all over the internet and forums nobody had this problem before , I'm preying now not to be the IO board .

Hello everyone, I'm having a big problem with my FB700 printer , after shutting down the next day didn't boot up stuck on blue HP logo without any initializing info at the bottom of the screen. I opened the user side the fans on the ebox not working when i turn on the machine , only the CPU fan...

Here

Happy New Year everyone I hope this year will be more healthy and safe for everyone. I have a FB700 and I'm having a problem with the cooling fans for the UV lamps , as soon as I turn the machine on it automatically starts the fan but not on the high speed like when they are cooling the lamps ...

It didn't work, I cleaned the motor like new with encoder strip and blue belt but it didn't work it still at the start up test it rise from one side only and gives me motor not moving. Is the firmware update or hard disk chkdsk might solve it?

Thank you very much, I'll keep you posted after the cleaning

Thank you sir for your reply, which motor do you mean , the rail lefting motor ?

Dear, I have an HP UV FB700 its been turned off for 2 weeks , now after turning in on I got an error E-HU-3 Rail motor not moving, the rail bar moves from one side only so i cleaned all the encoder strips with the sensors but still the same so I switched the sensors board left and right the...

Thanks for everyone, After all I changed all the dampers with new ink in the tanks and I change the flex cable now my machine is perfect. Thanks a lot