Search results

Test print. A test/nozzle check? It prints fine but yea i could make one just dont see why if test prints are ok as they were before. Condition in like what? Im constantly using the printer so ink was not sitting there for a long time or anything. Restrictions? I said i pulled ink from the...

The things ive done. 1. Changed motherboard 2. Changed head board 3. Changed printhead cables 4. Changed dumper for the problematic color 5. Replaced connwction cable from computer 6. Tried another pc with a demo version of flexi 7. Pulled ink directly from the lines before dumpers 8...

I swapped the heads, flushed them, pulled some ink with the syringe and printed this.. The bottom picture is unidirectional printing and the upper bidirectional. I didnt align the heads, you can even see a bit of the test print at the bottom of the picture.. so there is some banding. Anyway...

Did more testing.. actually when the head is returning all color channels print, when the head is going from right (cap station) to the left, the printer spits almost no color at the begining but prints perfectly at the end, far left.. i tried printing r copies of the same picture thats how ive...

I wrote to many online shops for the capping station. Couldnt get one, thats why i reapired this one. Seems ok. Pump is 2 years old, lines were changed. Dumper also. Now i changed even the black and black. I got these heads a year ago. They are refurbished heads but work like a charm, only the...

I took the heads off.. found a burnt cable from the head board, but it was on the right head the magent and yellow one.. i changed the head board, i had a spare one.. And after that ive found out that the printer works fine on bidirectional.. on unidirectional printing the head doesnt suck ink...

I tried a few files. Same with all. The ink is flowing when cleaning and there are no air bubbles. Its really weird. I think something changed in the settings.. i tried messing with a a few of them. But im almost sure something is not set as it should be after all im using 4 colors on a 6 color...

So agaain a weird problem. Im still using an old rj6100 with rockhopper 38 modified drivers. Anyway as you cannot get a new capping station for this old printer i took a few days to repair/rebuild the old one. In the meantime i soaked the heads in cleaning liquid. The pronter was turned off for...

Ok. Ive tried using the Falcon Outdoor Jr driver.. now with only cmyk colours works as a charm.. BUT! media size? can i set it bigger somehow? Is here anyone that can help?

As i said i already have the profiles from that site.. its actually what im using.. I just dont know if the way im trying to use them is correct.. set use profile.. then select a profile(cmyklclm).. and under simulation i select a cmyk profile?

Thank you but i already have the profiles from sais page. I dont think its profiles fault, but theres something that im missing while trying to print only CMYK on a CMYKLcLm printer

Hi, so i have this older rockhopper which uses cmyklclm colours.. but ive replaced the lc and lm with cleaning fluid just so i could print only with 4 colours. im using flexi 8. so the problem is i can print with no icc profiles on sticker vinyl or just simple things.. but for banners or any...

Can at least someone help me with buying a flexistarter liyu automark edition.. or whatever is it called? New or used license, doesnt matter? Im really desperate with this problem. Just to say i dont a full flexisign as i already have a full 8.6 version which i got with my printer.. Thank you

So noone had this problem? Its like the registration marks are rotated for 90 degrees comparing to what it then starts to cut, after reading the marks. Its really weird

Me again and my problems I got me a liyu tc1261-am it has an optical sensor to read marks thatare printed.. Then i had to buy a software thatwill read marks.. so i got me flexistarter 12 automark edition.. i got a usb key with an activation number. when i installed and activated thesoftware i...

So i have this weird problem with my Mutoh rockhopper 46 and flexi 8.6.. If import a pdf for example in flexisign and i plot from there i get some weird overspray, black.. if i put a file directly into production manager it prints ok, no overspray.. tho it seems as, when it loads/prints from...

yes those adapters/servers look nice.. i could order one. anyway i managed to get it to print from PP6! tho i dont understand whats wrong with onyx.. it could be the prninst file? i didnt use the one thats for version 10 onyx.. i just have the one for onyx 12 (from the printer&profile downlaod...

So i have this rj-6100 mutoh, got it recently.. still working on it, trying to clean the heads, soaking them.. but thats another story. Anyway it has a parallel port.. at first i tried with some chinese usb to parallel adapter but no luck.. now ive put a pci parallel card into my workstation...

ill try with other settings. thanks for the solution with the driver!

BRO! You are a genoius! :D But it still wont print, i guess the problem is my usb to parallel dongle.. but at least there are no errors in onyx! Just as we are here talking about this, do you have any experience with these usb to parallel converters, do they work or not? Thank you again for your...