• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

arizona 1300

  1. How to avoid rippling on RMO media (Canon Arizona 1360)

    Canon Arizona 1360 operator here. I am struggling with long banner prints on 54" reinforced banner vinyl, 13 oz weight. No matter how tight I pull the edges of the roll when loading it, the material starts to ripple in the middle when a banner is more than halfway done, sometimes nearly...

  2. Fuzzy fibers on the ends of a banner roll

    When I print reinforced banner material from a roll, the edges of the roll always seem to unravel into these thin hairlike fibers that wipe across the print heads and smear the ink, sometimes ruining otherwise good prints. The fresh new rolls are worse than older ones it seems. Pulling at the...

  3. Canon/Oce Arizona 1300 series - Repeated Roll Motion Errors with RMO

    The print shop I work at uses the Roll Media Option on the Arizona 1360 UV flatbed to print banners. So here's the latest problem. If you have this machine then you know how tricky/annoying it is with the foot pedal controls for the roll media load/unload process. If you press one of the two...

  4. Canon Arizona 1360 Roll Media Print Error Message

    I'm trying to print a very detailed CAD drawing on a Canon Arizona 1360 flatbed using the roll media option. The paper roll is 36" wide. The plan's very detailed and I need to use a high quality setting. I resized it to 35.80 so it won't spill off the edge of the paper if it's not perfectly...
Top