• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

backlit film

  1. Backlit media fast dry methods

    I have a brand new OKI 64 printing on the second best print level because I need thick black to block light. I need to print roll to roll without it sticking to itself. I am running a secondary IR heater across print after the bill of the printer. I have slowed the print speed down and tried...

  2. Backlit printing passes on Epson S60600

    New to creating profiles on an Epson, but is there a way to change the amount of passes on a generic backlit profile. We have a job that only has black lines that need to be printed and I need something faster than a 12 pass profile.
  3.

    Need Help Weird Print Pattern on Sihl 3747 Backlit Film using HP Latex 260

    Hello, see the attached image for reference. I am getting jagged off-color lines in my print. I ran a print job that was 476" long and this only happened to a couple of signs on the run. I checked the graphic and it should be a solid color. - This only happened to red and purple color solid...

  4. Need Help Perf Cutting Backlit Film

    Here's my setup: HP Latex 110 printing on PET backlit film media and cutting on a Graphtec FC-86000 cutter. I need to cut long rectangular sections approximately 16" x 96" in size. I had planned to perf cut them but I'm running into trouble separating them cleanly after cutting. It seems...
Top