• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

head board

  1.

    Mutoh E075Err Head temp

    After replacing the 4 Head cables I received this error "E075Err Head Temp", cables were not OEM and after putting the Original cables back into the Machine error is gone but I am unable to print anything, nozzle check don't show and no ink is coming out of the head, everything else seems to be...
    • Gus_3rd
    • Thread
    • 1324 error head board head cable mutoh
    • Replies: 2
    • Forum: Mutoh
  2.

    XC-540 MAGENTA Half Firing and woes..

    Hi folks, I had an engineer replace the cyan head as it was banding. In the process he showed me the cable connecting to the head one of the end pins was bent. He said it wont be an issue though and continued the process. The head was in and firing perfect for about 10metres. Then Group A...

  3. xc-540 Blowing F1 fuse

    I have searched the boards for something close to this but no luck. I had a head go bad so I changed it.I got 1/2 a test print and group A (C M)stopped printing. OK went through all the next logical steps. pull head cables to M/C heads power up fuse blows. take head cable off fuse still blows...
Top