mimaki banding

Been running a JV33 on a long run of large logos. The logos are predominantly dk blue lettering with a large red swoosh around it. After printing for about 3 ft or so, I suddenly get what looks like cyan contamination on the other heads as I get a nasty bunch of dark bands in the red as well...

Been running a JV33 on a long run of large logos. The logos are predominantly dk blue lettering with a large red swoosh around it. After printing for about 3 ft or so, I suddenly get what looks like cyan contamination on the other heads as I get a nasty bunch of dark bands in the red as well...

Been running a JV33 on a long run of large logos. The logos are predominantly dk blue lettering with a large red swoosh around it. After printing for about 3 ft or so, I suddenly get what looks like cyan contamination on the other heads as I get a nasty bunch of dark bands in the red as well...

Hello Guys, I want parameter mimaki jv33-160 ss21 Firmware 5.70 I habe error X over current, yesterday I was printed no problem today when turn on the printer i have this error I checked all cables and reconnect cables

Hi. I'm having a light banding issue so I started a media compensation test. Current value is 0. I noticed that at the start of the print, on the far right, the lines do not touch. They start touching near the far left of the paper and then, at the end, overlap. How is that possible? What should...

Please can you help We have a mimaki jv33-160 solvent printer. Has been running really well but recently realised when ink is running low or is empty does not detect this. We have to changeover ink when it is at 2 percent So in the long run a lot of ink wastage Secondly our test draw is...