I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
I replaced the maintenance station and dampers along with the joint going into the Y cartridge holder because it had a leak. Now none of the ink will charge. I've tried many times, both normal and little ink charge and several cleanings. I can pull ink to the head with a syringe but it starts...
Hey everyone,
I have been troubleshooting, repairing, and replacing parts on our SP300V for about 2 weeks and I'm to a point where I'm stuck.
1. Originally our black (K) stopped printing completely, and I noticed that the manifold for the print head had somehow snapped so ink suction wasn't...
Hi,
I'd really appreciate some help or advice.
I noticed some streaks in prints, mostly when printing grey, but slightly visible in black too.
Nozzle check showed some missing nozzles on black only.
Replaced the maintenance station with a brand new OEM one.
Performed several cleanings and...
Run a test print / nozzle check and getting zero on the media. Ran cleanings and also manually soaked to head at an attempt to removed any clogged / dried ink in the heads. We have taken apart the front of the right maintenance station to gain access to the pumps to see if their was a clog and...
I just bought a Mutoh Falcon Outdoor 48 at auction for next to nothing figuring that it would be worth a shot to try and resurrect it. It had been sitting for a couple of years and ink was left in the lines when stored. I purchased a refurbish kit from cmykparts.com and new ink.
I have taken...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.