• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

print issue

  1. Print quality issue

    Hi there. Getting this. See photos. Oldish Mutoh. (running via ColourGate). Horizontal lines. Trying to do a high end sign. It will be viewed close up. I know I can fix by uping the ink (say going from 8 pass to 9pass). but this will obviously make it darker and customer has already ok the...
  2. Need Help Profile Settings for Roland BN-20

    Please help! So I got the Orajet 3651 glossy and I'm trying to print something with the BN-20, but the print comes up with lines like this(See attached image). I believe the cause for this is the profile settings. I have searched the available profiles of Roland on their website, but the Orajet...
  3. Need Help DesignJet z6810 printing light band at front head of each print

    Title is my issue... I replaced the Magenta-Yellow print heads in my HP DesignJet z6810 on Tuesday, and it seems like since then, when I print anything from our normal Onyx RIP, no settings having been changed, the front 1" or so will be a lighter color than the rest of the print. In darker...
  4. Need Help HP L25500 Trouble with Yellow/Black

    So I'm having a new problem with my HP L25500. It gave me a faulty print head error right before Christmas and it's been an oversized paper weight ever since. I went ahead and replaced #4 like it said. I know, replace in pairs, but for some reason I only had one in stock. So I replaced #4 and it...
  5. Trouble with print after head change

    I have a Roland XC540 and we just changed out the light magenta head, dampers and cap tops. I don’t notice them on images but any fonts are printing with a pink ghost double outline (see attached picture). I’ve calibrated the machine and everything looks good. I’ve got the right media profile. I...
  6. XC-540 Light Cyan not printing right.. help?

    Hi, When I run a test print the light cyan looks pretty good overall (see the black arrow on the attached image), but images containing blue will get a slight over spray of cyan. A test print in service mode shows the light cyan to be misaligned in sections of it (see red arrow). Has anyone...
  7. I need the impossible

    I am trying to create some graphics on the Edge FX and am faced with the demand for a large field of solid color. While this is not my first rodeo, I have only rarely seen any Edge printer do large fields of color without a few minor flaws or little specs of missing color. in some cases, on the...
Top