roland vp540

Hi I’m having trouble with mu cyan creating overspray around everything I print I’ve done a test 100% CMYK colours in the photo theirs a little overspray on the black that is excepts let but the blue is not here’s what I’ve tried so far any help would be appreciated 1 test print many times all...

Hi, My friend have a broken Roland VP540 with the very usually "no connection" problem. We have tried all the other fixes but nothing helped. So I ordered a new Realtek network chip. I have now replaced the old one with the new chip. The leds on the network port does not lit up or blink/flash...

Roland vp 540 Continually blows Fuse F1 on main board Install new fuse turn main power on fuse is still good Turn secondary power switch on and fuse blows immediately I disconnected all 4 print heads install new fuse turn power on at rear fuse is good turn power on front blows fuse I...

Hi There Back with this issue, it looks like the blue is being placed incorrectly, almost like when a litho press's registration is off. I have done cleans, destatictized, reset, anything I can think of however cant get it right. Its not the artwork either, as we have used the exact same file...

Was wondering if anyone has come across this issue with their Roland VP-540 or other Roland using Versaworks. Here is an example of what is happening: We print one side of a vehicle wrap. The print and the color are great. For whatever reason we need to reprint one of the panels and the...

Hi! I've posted a similar thread on another forum but I am so worried about this I thought i'd ask here as well. At the most inconvenient of times, our Versacamm sp540v has broken down for the first time ever. It keeps coming up with a "pinchroll error: incorrect position" fault, and no longer...

Is there any other way of aligning banner material on th VP540 other than pulling it from the center and hope for the best? I'm doing 75 ft rolls at a time and re-setting about every 20ft or so...any advice appreciated!

Carriages are seperated??? Is there any way to fix this???? :banghead::banghead::banghead:

Hi All, I'm having a problem with certain colours printing too thick. This case its dark green. I sued to run a SP540V and the colours we solid. Now we upgraded to the VP 540 and the colours are grainy/noisey and darker colours print so thick that you can actually see the ink build up along...