• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

router bits

  1. New to CNC - what are some bits/cutters?

    I just purchased the Elite Foreman OneFinity and this is my first CNC. Used one in the 90s but havent done signs since, until recently getting back into it. Looking to do a variety of signs and start learning. Any kits out there for bits/cutters and or brands to use rather than buy crap ones...

  2. Colex polished edge acrylic?

    I'm not getting repsonses from Colex themselves yet. They offer two router bits, T00546 and T00547, which are described as leaving a polished finish on acrylic. We use lots of .25" and .375" acrylic and don't want to flame polish of chemically polish. Are there other bits to recommend? I'd...

  3. Question V Grooving bit to make french cleats?

    Hello, I wanted to make 1/2 PVC french cleats using my CNC router (( Colex Sharpcut)) because using the table saw is very messy. I found a V groove bit that cuts at 90 degree angle ((Onsrud 37-87)) but it requires a 1/2” collet which I dont have. Does anyone have a better idea? I can only make...
  4. Michael Colella

    Equipment Manufacturers & Distributors Colex Finishing Soltions, INC.

    Book a private webinar of our wide-format finishing products at colex.com/live-webinars or email sales@colex.com. Colex will be doing a public webinar every day @ 3:30 pm EST. (https://global.gotomeeting.com/join/976113429) All webinar attendees will receive a phone case and cut samples! Colex...
    • Michael Colella
    • Resource
    • #cnc #finishing cncrouter finishing equipment flatbed cutter kiss cut router router bits router cnc
    • Category: Merchant Members

  5. Can I Cut .080 Aluminum on Esko ?

    We have big job of Aluminum .080 to cut. In the past we out source Aluminum cutting, now we have Esko XN24 router with 3KW head. We have never tried cutting aluminum on it. Mainly use it to cut vinyls , PVC and coroplast. Please share if any of you have success cutting aluminum on Esko and what...

  6. round hole, square peg. Milling down 1/2" shank to 6mm for Zund collet..

    Hello, I own a 2008 L2500 ZUND with 1 Kw router. Purchased mainly for graphics purposes, but we've been using it more and more for CNC projects that require joinery. In a perfect world, I would purchase a 91 degree folding miter bit and pop it in there and save about 2/3 the time it takes to...

  7. Router Bits

    HELLO There ,...... We are new to this community ************************. Hoping to make some new contacts.......would appreciate your consideration..... Thanks So Much !! Ron R.B. SUPPLY
Top