• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

summa s2 t140

  1.

    Summa S2 T140 - How Do I Send Longer Perf Cut Length?

    My workflow has me using Flexi regrettably and I am trying to figure out how to send perfcuts with longer lengths. It seems that it is taking forever to get through an inch of material. We have a small kiss cut and a perf cut - the perf cut is where its going wrong. Any ideas???
    • SuperDTF
    • Thread
    • flexi sai summa summa s2 t140
    • Replies: 2
    • Forum: Flexi
  2.

    Wide Format HP Latex 315 + Summa Tangential T140 & all Media

    Oct 2019 HP Latex 315 (54" printer). Total Media printed so far is 10,042 SF / 932 SM. We just installed the first new inks from original setup. (Kept those cartridges because they still had ink and felt they could still be utilized. ) Bought mostly for printing HTV for sports uniforms and...
  3.

    Need Help Summa S 120 T sawtooth cut

    Hello everybody I own a Summa S 120 T cutter and i'm facing a problem after i had to unscrew and lift up the tangential clamp (loosing 4 scews see pict) to remove a tangential blade wich was blocked alone. After mounting up everything the cutting is not horrible in sawtooth. Can anyone know...
    • petit
    • Thread
    • cutting issues help problem sawtooth summa summa s2 t140
    • Replies: 3
    • Forum: Summa

  4. Need Help S2 T140 panelling issue

    hi all. Im pretty new to this forum but want to check if you guys have any solution for my problem. When i chose panelling on or 4 marks, my summa reads the first 4 marks and cuts all it should. but then when its about to re-read the mark number 3 (because it is the new mark number 1 for coming...
  5.

    Need Help Summa S2 T140 Coil setting- head not touching media

    I just bought a used Summa S2 T140 and I am using Winplot to drive the cutter. I also have Onyx 12. My problem is that I get uneven cutting depth across the media. Sometimes the cuts are good on the left, and then cut all the way through on the right. I thought it might be the tape like others...
    • XL
    • Thread
    • Replies: 2
    • Forum: Summa
Top