• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

voltage

  1. Need Help Oce Arizona 460GT Head Voltage

    Hello everyone, need help, i was running my Arizona 460 GT on IJC258 ink, when i was starting use IJC257, in registry i changed ink type, but ink temperature and i thing voltages also changed automatically. can anyone is running Arizona 460, can you send me registry file, or tell me what is...
  2. Sizing transformer for custom made neon light

    I have a friend who got a custom made neon sign/sculpture and the transformers have gone bad. Unfortunately the two transformer are very old so there is no labeling on what their voltage output was. How can i determine how many volts I need? I don’t want to have too much voltage and damage it...
  3. Oce Arizona Printhead Temperature over 200 celcius

    Technician came to level my printbed. We'd removed the magnetic table top and he spent the better part of a day tweaking the table and measuring with a dial indicator. I went to print the next day and had two adjacent nozzles out on black that cannot be cleared. Technician came and then found...
  4. cutter drag / running off on print & contour cut - voltage, blade angle or depth?

    Hi Folks, I'm running a tjet1671c. My 'current' prob is that it starts a cut fine but as time goess on the cut runs off. i'm cutting out motox / quad decals. 1.5m x 1.5m. If I use 2 or 3 cuts, after the first cut, the 2nd cut is say 5mm on the x and y axis off. i had thought it was initially...
  5. JV3 heater wiring - voltage

    Doing some routine maintenance, I reinstalled some hardware on the JV3 after cleaning around the heads, and my hand every so lightly bumped up against the wiring for the voltage selector, located on the underside of the machine, at the far left side. These are the selectors that allow you to...
Top