Just In 1204 parts going cheap

[floater302]

I have 3 Mutoh 1204 printers that im not gonna be using anymore, so that means i have parts from them... and they will be going very cheap except the printhead, if you need something let me know.

 

[lostbay]

Need a main board and ink ID boards...

 

[Solventinkjet]

Just keep in mind that depending on how old the machines are, the main boards might only work in 1204s and not other ValueJets.

 

[floater302]

Need a main board and ink ID boards...

I have 5 ink boards and 4 main boards but not sure if main boards will work they been out for awhile

 

[411Graphics]

Looking for a media take up bar for one. As well as a few other parts.

 

[floater302]

Looking for a media take up bar for one. As well as a few other parts.

Yes i have a take up reel form a 1204

 

[adgrafixdesigns]

Looking for a

VJ-1204 CR Encoder Assy - DF-48986 and​

Drafstation PF_ENC scale Assy - DF-49028 and​

RJ-900C P_Edge Sensor Assy - DF-48983 and T fence​

 

[longislandgraphix.co]

I have 3 Mutoh 1204 printers that im not gonna be using anymore, so that means i have parts from them... and they will be going very cheap except the printhead, if you need something let me know.

hi how much for the main board and can you tell me the part number so I can check mine is a 1204A

 

[laneygraphics]

I have 3 Mutoh 1204 printers that im not gonna be using anymore, so that means i have parts from them... and they will be going very cheap except the printhead, if you need something let me know.

Hello, i have a 1324 machine, and am looking for the handle that lifts the pinch rollers, based on some photos i think the 1204 might be the same, it would be the plastic arm that attaches to a hex shaft near the maintenance station that the orange lever bolts to. Also looking for the part where the material rod sets on the back of the machine. let me know if you are still parting out machines or if you might have these available, thank you.