• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

1204 possible head issue

oldcaliprinting

oldcaliprinting

New Member
Had some issues with nozzle check not 100%, had to pull the head and flushed with some air. Got it back to 100 but now I get a magenta line under my blacks.
Nozzle check looks good. Wondering if its some sort of alignment issue?
 

Attachments

  • PXL_20220413_224321100.jpg
    PXL_20220413_224321100.jpg
    1.1 MB · Views: 222
  • PXL_20220413_224237577.jpg
    PXL_20220413_224237577.jpg
    1.2 MB · Views: 153
Solventinkjet

Solventinkjet

DIY Printer Fixing Guide
The head is crooked. You need to go into service mode and run the head slant adjustment. It prints a set of black and magenta lines that you need to make line up using the lever on the right side of the head carriage.
 
You must log in or register to reply here.
Top