2007 AXYZ 4008. powers up, but wont move or do nanything....help please

[AC-Signs]

I have a 20047 AXYZ 4008 Router table, which has been a pretty good /reliable table. Over the last few years it has been having little issues, of which luckily I had bought some parts from someone scrapping out a table.
The issue I had today was when we turned on the machine it powered right up, but did nothing after that. The control Pendant lights up and says "Operator Pendant Rev 2002A. I tried checking the fuses and they all seem to be good,. Any insight or suggestions would be greatly appreciated. It has the spindle controller COMMANDER SE. I was able to go into the setting on it and turn on and off the spindle(but in doing so messed up a few settings), so now when I turn the machine on the spindle turns on and I have to hit the stop button on the Commander control.

 

[johnnysigns]

I'd honestly join the facebook group AXYZ has. They have a tech in there that can at least start the diagnosis. Offhand their cheapest phone support package costs $425 for a year so you can call in and start a support ticket.

 

[Darren Spear]

Check to see if the emergency stop got pressed by accident

 

[AC-Signs]

Thank you! I actually replaced the AMC board today and that appears to have been the issue, but unfortunately I had messed with some settings on the commander se and not sure if I have them reset back to where they were. So if anyone has any insight on the settings I would greatly appreciate your assistance