3.3 inch stripe on a motorcycle helmet

[binki]

Need to do a racing stripe on a motorcycle helmet. 3.3 inches wide with two smaller stripes. What vinyl to use to keep it from wrinkling at the edges? Would Oracal 751 work for this or do I need to go to a printed vinyl and print the color?

 

[OldPaint]

if you do 3 inches....you wont get wrinkles))))))

 

[binki]

it needs to be 3.3 to cover an existing graphic. Running front to back is not a problem but as the helmet curves side to side it is.

 

[binki]

The Oracal 751 did work out ok. I was able to splice in the back where there was a leather snap and that helped out.