3 month Box Truck Graphics

[signage]

If you client might drive the truck, Do Not use "bannertrack".

Use these frame instead. Cost about $6 a linear foot.

Gnemmas who makes those extrusions?

 

[radelta1]

Ij 36-20

Has anyone applied 3M IJ36-20 over rivets?

 

[phototec]

Gnemmas who makes those extrusions?

+1

Waiting?

 

[SightLine]

I belive those are Ackland frames and yes they are far better than most other banner frames. Many of the other ones out there require hemmed edges or even lame proprietary beads welded to the edges.

With Ackland frames you simply put banner tape on the inside part of the frame, stick your banner onto it, then screw the outer frame down to secure it.

We have not installed any ourself yet but we are setup with them and have done a contracted changeout of a banner on a couple. Very easy. Only thing was we had to scrape and clean up the double sided tape left over on the inner frame and put new tape on.

http://www.acklandframes.net

If you client might drive the truck, Do Not use "bannertrack".

Use these frame instead. Cost about $6 a linear foot.

Gnemmas who makes those extrusions?

+1

Waiting?

 

[signage]

Sightline thanks for posting the link!

 

[Locals Find!]

Bump for someone looking for this thread

 

[quicksigns]

Thanks! exactly what I was looking for.

 

[Pat Whatley]

http://www.rak-tek.com/index.php?page=framesys&pagesub=about

 

[petesign]

You might also consider IJ40R, it has air release and is removable, whereas IJ36 does not have the comply. I like the banners idea, will be a lot easier to sell the change-outs with that system!