Add another Colex or will one Zund do what the two Colex

[Graphic Realm]

I know it is vague not detailing the amount of work and what not but it’s simply just a speed issue

 

[victor bogdanov]

Maybe at least say what you're cutting and bed sizes/models

 

[Graphic Realm]

5’x10’
ACM, Coro, foam, ultra 6mm pvc

 

[White Haus]

I know it is vague not detailing the amount of work and what not but it’s simply just a speed issue

So why not put a tiny bit of effort into explaining yourself and maybe you might just get some helpful answers..................?

 

[Print1]

I’d look at cutworx, they have a great line up that would likely fit the bill.. centrally located as well.
https://www.cutworxusa.com/

 

[Modern Ink Signs]

I went with Esko over Zund

 

[Raum Divarco]

5’x10’
ACM, Coro, foam, ultra 6mm pvc

For the things you are router cutting, are the complex contours or more square cuts?
What diameter bit are you using for majority of these router jobs.

 

[Raum Divarco]

I went with Esko over Zund

Was it one of the edge machines or the C Series?
The C series machines are definitely top tier.

 

[Raum Divarco]

I’d look at cutworx, they have a great line up that would likely fit the bill.. centrally located as well.
https://www.cutworxusa.com/

If they already have a colex, that can be used for more heavier duty processing.
Platforms like the Apex Pro have the rack drives supplemented with a tensioned belt system to improve speed.
This is useful with knife cutting operations as just rack and pinion can only go so fast depending on the encoder system used.
If just speed specs are needed for considerations, the Celero 7 platforms are lightning quick.

 

[Superior_Adam]

I would say Zund. There is a reason they are more money. Talked to a lot of people that had experience with Esko and Zund and they said they would never do Esko again as the Zund is that much better. There is a plant near me that has 9 zund machines in total. That says something. I have had mine for 3 years and not 1 tech visit needed.

 

[Gordon@Colex]

If you’re asking if two cutters would be more productive then one absolutely. Keep in mind that the new Colex Sharpcut Pro is faster than the Zund G3 or the Kongsberg C series cutters in max cutting speed. We are also much faster in Acceleration than the Zund. With that I can make a very good argument that the Colex SXC1732 or the SX1732 is more productive than the Zund one on one.

Give me a call or shoot me an email and we can go over everything.

Gordon 585-739-1046 or gkane@colex.com