Adding plotter driver???

[BryanQ]

I have Composer 2.02 and recently acquired an old Graphtec Cutting Pro FC4100-75. In the list of plotters, this isn't an option. Years ago I remember using a generic HPGL 24 driver for an old Ioline I had and it worked well. This Graphtec is a 30" so there isn't an option for that. Any advice?

 

[J Hill Designs]

setup a generic 48" and watch what you are cutting as far as size?

 

[idsignsil]

I have the same plotter and had the same problem. I contacted Gerber tech support and they told me to choose HPGL_Simple from the list of available plotters. You then have to tell it what the width is. I also renamed mine to FC4100-75. I am 99% sure it was the HPGL_Simple, but there is also the HPGL_Smart and HPGL_Smart_PD. I remember having to play around with it, but eventually I think I got it working with the simple. It was a couple of years ago.....lot of beer and sleep since then. Hope this helps.

 

[Sign Up Graphics]

Sign Up Graphics

I have the same GRAPHTEC FC4100-75 and I using the HPGL 30'' driver for
an old IOLINE, it's work great for me.