FWIW the Roland glossy adhesive photo paper is pretty nice and works well for short term stuff. Be aware that it's a pretty aggressive adhesive that will tear the paper apart if you mis-apply and try to pull it back up. Once it's stuck it's done. It's also a little bit of a PITA to remove from the backing on an edge if the media is cut to the same edge as the liner, so plan your cuts/weeding appropriately for that. If you just print and then square cut everything, you're gonna fight to get it off the backing, so if this is something you're giving to a client to apply, leave a weeded border around at least one of the edges.