• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Aftermarket Plotter Blades

Goatshaver

Goatshaver

Shaving goats and eating bushes
Just wondering who y'all use for your plotter blades. I'm using a Graphtec FC9000 and have been having a hard time getting blades from Clean Cut. Just looking for other options just in case I'm in need of blades before they can fill my order. I know the obvious place is from Graphtec themselves but I'm looking for aftermarket options as well.
 
mfatty500

mfatty500

New Member
I too, use the blades that victor has link to, they are cheap, and do the job, I a lot of Glitter HTV, and these last longer than a clean cut blade, (I've never had good luck with clean cut blades).
 
Goatshaver

Goatshaver

Shaving goats and eating bushes
victor bogdanov said:
I get them on amazon, works great


Almost no difference from the expensive OEM blades. We can only sometimes tell a difference on very detailed heat transfer material. Other than that there is no reason to pay 15x for OEM blades
Click to expand...
I'll give them a shot. I use their 60 deg blades for through cuts with an aftermarket holder and I occasionally get some blades that are just dull right out of the box, but for that price I can live with that. Would prefer to support a US company but if I can't get blades I'll have to go with the place where I can get them.
 
V

victor bogdanov

Active Member
Goatshaver said:
I'll give them a shot. I use their 60 deg blades for through cuts with an aftermarket holder and I occasionally get some blades that are just dull right out of the box, but for that price I can live with that. Would prefer to support a US company but if I can't get blades I'll have to go with the place where I can get them.
Click to expand...
clean cut isn't a US company either
 
V

victor bogdanov

Active Member
mfatty500 said:
Sure they are, made in Iowa.
www.cleancutblade.com

Industrial Blades Manufacturing in Waterloo, IA - Blade Makers

Clean Cut Blade LLC is your local team of custom blade makers in Waterloo, IA. We specialize in industrial blades manufacturing, so give us a call today!
www.cleancutblade.com www.cleancutblade.com
Click to expand...
hmm

Clean Cut Blades | Replacement Blades for Plotters and Vinyl Cutters

Long lasting, sharper replacement cutting blades for all brands of machines including, Graphtec, Roland, Mimaki, Summa, Ioline, Mutoh, GCC, Gerber and more.
cleancutblades.com cleancutblades.com

CleanCut Blades

Unit 2, Block A
Westpark 26
Wellington
Somerset
TA21 9FH
United Kingdom



I don't see any Made in USA on that site you posted, usually that would be bold and center
 
Last edited:
Goatshaver

Goatshaver

Shaving goats and eating bushes
There are two different sites. Cleancutblade.com and Cleancutblades.com only difference is an S.
The UK site states anyone purchasing blades for the US are made in the US so I'm not sure if they are related or not.
Untitled-1.png
 
V

victor bogdanov

Active Member
One other difference I have noticed between OEM blades and the cheap chinese blades is the OEM blades tend to chip at the tip at the end of life, they'll cut great until they chip mid job and then don't cut at all. The chinese blades tend to get duller and duller without tip chipping so cutting performance goes down at end of life of the blade but it still cuts good enough to not ruin a job
 
ProColorGraphics

ProColorGraphics

New Member
Saturn said:
You get Summa ones? Can you share a quantity and price?
Click to expand...
I will try to look up what I got. I get a quantity of like 20 of each blade. I get 6 or so different ones for my Summa F. So far, they all have worked great. Even if they "dull" or break twice as often, I am still WAY ahead of OEM price wise.
 
Saturn

Saturn

Your Ad Here!
Yeah, this is the only thing about Graphtec that I envy. I love my Summa 45° blades, but they're about $60-65 each.... I have yet to find a reliable resource for specifically 45° degree tangential Summa blades. China-Oyea sounds promising, but we'll see...

Would love some magical way to sharpen them in-house so I could get a couple uses out of each one.

victor bogdanov said:
One other difference I have noticed between OEM blades and the cheap chinese blades is the OEM blades tend to chip at the tip at the end of life, they'll cut great until they chip mid job and then don't cut at all. The chinese blades tend to get duller and duller without tip chipping so cutting performance goes down at end of life of the blade but it still cuts good enough to not ruin a job
Click to expand...
Great observation. I use the Summa OEM blades and that's usually how they fail, the tip chips. Can be the first day, or two months in. When a blade really kicks ass, is when is slowly wears down instead of that hard failure. Perhaps an unintended and unexpected "feature" of the Chinese ones is using a softer metal.
 
mfatty500

mfatty500

New Member
victor bogdanov said:
One other difference I have noticed between OEM blades and the cheap chinese blades is the OEM blades tend to chip at the tip at the end of life, they'll cut great until they chip mid job and then don't cut at all. The chinese blades tend to get duller and duller without tip chipping so cutting performance goes down at end of life of the blade but it still cuts good enough to not ruin a job
Click to expand...
If my memory recalls, I talked to the owner a few years back about his blades breaking the tip off, he told me he used a different hardness of steel, I cut a lot of glitter HTV, and they just would not hold up, they would be junk in a couple of days, that's when I started using those cheaper ones from Amazon.
 
V

victor bogdanov

Active Member
mfatty500 said:
If my memory recalls, I talked to the owner a few years back about his blades breaking the tip off, he told me he used a different hardness of steel, I cut a lot of glitter HTV, and they just would not hold up, they would be junk in a couple of days, that's when I started using those cheaper ones from Amazon.
Click to expand...
The worst part about the oem blades is the tip breaking, 10% of the blades would break on day 1 for me when I had summa t series. Left a comment about it on summa reviews and that was deleted pretty fast. Blades are way too expensive for them to break that fast
 
You must log in or register to reply here.
Top